Jobs HTTP API

The /jobs endpoints are used to query for and interact with jobs.

List Jobs

This endpoint lists all known jobs in the system registered with Nomad.

Method	Path	Produces
`GET`	`/v1/jobs`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`YES`	`namespace:list-jobs`

Parameters

prefix (string: "") - Specifies a string to filter jobs on based on an index prefix. This is specified as a query string parameter.
next_token (string: "") - This endpoint supports paging. The next_token parameter accepts a string which identifies the next expected job. This value can be obtained from the X-Nomad-NextToken header from the previous response.
per_page (int: 0) - Specifies a maximum number of jobs to return for this request. If omitted, the response is not paginated. The value of the X-Nomad-NextToken header of the last response can be used as the next_token of the next request to fetch additional pages.
filter (string: "") - Specifies the expression used to filter the results. Consider using pagination or a query parameter to reduce resource used to serve the request.
namespace (string: "default") - Specifies the target namespace. Specifying * would return all jobs across all the authorized namespaces.
meta (bool: false) - If set, jobs returned will include a meta field containing key-value pairs provided in the job specification's meta block.

Sample Request

$ curl https://localhost:4646/v1/jobs

$ curl https://localhost:4646/v1/jobs?prefix=team

$ curl https://localhost:4646/v1/jobs?namespace=*&prefix=team

Sample Response

[
  {
    "ID": "example",
    "ParentID": "",
    "Name": "example",
    "Type": "service",
    "Priority": 50,
    "Status": "pending",
    "StatusDescription": "",
    "JobSummary": {
      "JobID": "example",
      "Namespace": "default",
      "Summary": {
        "cache": {
          "Queued": 1,
          "Complete": 1,
          "Failed": 0,
          "Running": 0,
          "Starting": 0,
          "Lost": 0
        }
      },
      "Children": {
        "Pending": 0,
        "Running": 0,
        "Dead": 0
      },
      "CreateIndex": 52,
      "ModifyIndex": 96
    },
    "CreateIndex": 52,
    "ModifyIndex": 93,
    "JobModifyIndex": 52
  }
]

Create Job

This endpoint creates (aka "registers") a new job in the system.

Method	Path	Produces
`POST`	`/v1/jobs`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`NO`	`namespace:submit-job` `namespace:sentinel-override` if `PolicyOverride` set

Parameters

Job (Job: <required>) - Specifies the JSON definition of the job.
Submission (JobSubmission: <optional>) - Specifies the original HCL/HCL2/JSON definition of the job. This data is useful for reference only, it is not considered for the actual scheduling of Job.
EnforceIndex (bool: false) - If set, the job will only be registered if the passed JobModifyIndex matches the current job's index. If the index is zero, the register only occurs if the job is new. This paradigm allows check-and-set style job updating.
EvalPriority (int: 0) - Override the priority of the evaluations produced as a result of this job registration. By default, this is set to the priority of the job.
JobModifyIndex (int: 0) - Specifies the JobModifyIndex to enforce the current job is at.
PolicyOverride (bool: false) - If set, any soft mandatory Sentinel policies will be overridden. This allows a job to be registered when it would be denied by policy.
PreserveCounts (bool: false) - If set, existing task group counts are preserved, over those specified in the new job spec.

Sample Payload

{
  "Job": {
    "Datacenters": ["dc1"],
    "ID": "cache",
    "NodePool": "prod",
    "TaskGroups": [
      {
        "Name": "cache",
        "Networks": [
          {
            "DynamicPorts": [
              {
                "Label": "db",
                "To": 6379
              }
            ]
          }
        ],
        "Services": [
          {
            "Name": "redis-cache",
            "PortLabel": "db"
          }
        ],
        "Tasks": [
          {
            "Config": {
              "image": "redis:7",
              "ports": ["db"]
            },
            "Driver": "docker",
            "Name": "redis"
          }
        ]
      }
    ]
  }
}

Sample Request

$ curl \
    --request POST \
    --data @payload.json \
    https://localhost:4646/v1/jobs

Sample Response

{
  "EvalID": "",
  "EvalCreateIndex": 0,
  "JobModifyIndex": 109,
  "Warnings": "",
  "Index": 0,
  "LastContact": 0,
  "KnownLeader": false
}

Parse Job

This endpoint will parse a HCL jobspec and produce the equivalent JSON encoded job.

Method	Path	Produces
`POST`	`/v1/jobs/parse`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`NO`	`namespace:parse-job` `namespace:submit-job`

Parameters

namespace (string: "default") - Specifies the target namespace. If ACL is enabled, this value must match a namespace that the token is allowed to access. This is specified as a query string parameter.
JobHCL (string: <required>) - Specifies the HCL definition of the job encoded in a JSON string.
Canonicalize (bool: false) - Flag to enable setting any unset fields to their default values.
Variables (string: "") - Specifies HCL2 variables to use during parsing of the job in the var file format.

Sample Payload

{
  "JobHCL": "job \"example\" {\n  type = \"service\"\n  group \"cache\" {}\n}",
  "Canonicalize": true
}

You can use a tool such as jq to generate the payload from a local HCL file:

$ jq -Rsc '{ JobHCL: ., Canonicalize: true }' example.nomad.hcl > payload.json

Sample Request

$ curl \
    --request POST \
    --data @payload.json \
    https://localhost:4646/v1/jobs/parse

Sample Response

{
  "AllAtOnce": false,
  "Constraints": null,
  "Affinities": null,
  "CreateIndex": 0,
  "Datacenters": null,
  "ID": "my-job",
  "JobModifyIndex": 0,
  "Meta": null,
  "Migrate": null,
  "ModifyIndex": 0,
  "Name": "my-job",
  "Namespace": "default",
  "NodePool": "prod",
  "ParameterizedJob": null,
  "ParentID": "",
  "Payload": null,
  "Periodic": null,
  "Priority": 50,
  "Region": "global",
  "Reschedule": null,
  "Stable": false,
  "Status": "",
  "StatusDescription": "",
  "Stop": false,
  "SubmitTime": null,
  "TaskGroups": null,
  "Type": "service",
  "Update": null,
  "Version": 0
}

Read Job

This endpoint reads information about a single job for its specification and status.

Method	Path	Produces
`GET`	`/v1/job/:job_id`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`YES`	`namespace:read-job`

Parameters

:job_id (string: <required>) - Specifies the ID of the job. This is specified as part of the path.
namespace (string: "default") - Specifies the namespace of the job. If not specified, defaults to "default". This is specified as a URL query parameter.

Sample Request

$ curl \
    https://localhost:4646/v1/job/my-job

$ curl \
    https://localhost:4646/v1/job/my-job?namespace=apps

Sample Response

{
  "Region": "global",
  "Namespace": "apps",
  "ID": "example",
  "ParentID": "",
  "Name": "example",
  "Type": "batch",
  "Priority": 50,
  "AllAtOnce": false,
  "Datacenters": ["dc1"],
  "NodePool": "prod",
  "Constraints": [
    {
      "LTarget": "${attr.kernel.name}",
      "RTarget": "linux",
      "Operand": "="
    }
  ],
  "TaskGroups": [
    {
      "Name": "cache",
      "Count": 1,
      "Constraints": [
        {
          "LTarget": "${attr.os.signals}",
          "RTarget": "SIGUSR1",
          "Operand": "set_contains"
        }
      ],
      "Affinities": [
        {
          "LTarget": "${meta.datacenter}",
          "RTarget": "dc1",
          "Operand": "=",
          "Weight": 50
        }
      ],
      "RestartPolicy": {
        "Attempts": 10,
        "Interval": 300000000000,
        "Delay": 25000000000,
        "Mode": "delay"
      },
      "Tasks": [
        {
          "Config": {
            "command": "env",
            "image": "alpine"
          },
          "Driver": "docker",
          "Lifecycle": {
            "Hook": "prestart",
            "Sidecar": false
          },
          "Name": "init",
          "Resources": {
            "CPU": 100,
            "MemoryMB": 300
          }
        },
        {
          "Name": "redis",
          "Driver": "docker",
          "User": "foo-user",
          "Config": {
            "image": "redis:latest",
            "port_map": [
              {
                "db": 6379
              }
            ]
          },
          "Env": {
            "foo": "bar",
            "baz": "pipe"
          },
          "Services": [
            {
              "Name": "cache-redis",
              "PortLabel": "db",
              "Tags": ["global", "cache"],
              "Checks": [
                {
                  "Name": "alive",
                  "Type": "tcp",
                  "Command": "",
                  "Args": null,
                  "Path": "",
                  "Protocol": "",
                  "PortLabel": "",
                  "Interval": 10000000000,
                  "Timeout": 2000000000,
                  "InitialStatus": ""
                }
              ]
            }
          ],
          "Vault": null,
          "Templates": [
            {
              "SourcePath": "local/config.conf.tpl",
              "DestPath": "local/config.conf",
              "EmbeddedTmpl": "",
              "ChangeMode": "signal",
              "ChangeSignal": "SIGUSR1",
              "Splay": 5000000000,
              "Perms": ""
            }
          ],
          "Constraints": null,
          "Affinities": null,
          "Resources": {
            "CPU": 500,
            "MemoryMB": 256,
            "DiskMB": 0,
            "Networks": [
              {
                "Device": "",
                "CIDR": "",
                "IP": "",
                "MBits": 10,
                "ReservedPorts": [
                  {
                    "Label": "rpc",
                    "Value": 25566
                  }
                ],
                "DynamicPorts": [
                  {
                    "Label": "db",
                    "Value": 0
                  }
                ]
              }
            ]
          },
          "DispatchPayload": {
            "File": "config.json"
          },
          "Meta": {
            "foo": "bar",
            "baz": "pipe"
          },
          "KillTimeout": 5000000000,
          "LogConfig": {
            "Disabled": false,
            "MaxFiles": 10,
            "MaxFileSizeMB": 10
          },
          "Artifacts": [
            {
              "GetterSource": "http://foo.com/artifact.tar.gz",
              "GetterOptions": {
                "checksum": "md5:c4aa853ad2215426eb7d70a21922e794"
              },
              "RelativeDest": "local/"
            }
          ],
          "Leader": false
        }
      ],
      "EphemeralDisk": {
        "Sticky": false,
        "SizeMB": 300,
        "Migrate": false
      },
      "Meta": {
        "foo": "bar",
        "baz": "pipe"
      }
    }
  ],
  "Update": {
    "Stagger": 10000000000,
    "MaxParallel": 1
  },
  "Periodic": {
    "Enabled": true,
    "Spec": "* * * * *",
    "SpecType": "cron",
    "ProhibitOverlap": true
  },
  "ParameterizedJob": {
    "Payload": "required",
    "MetaRequired": ["foo"],
    "MetaOptional": ["bar"]
  },
  "Payload": null,
  "Meta": {
    "foo": "bar",
    "baz": "pipe"
  },
  "Status": "running",
  "StatusDescription": "",
  "CreateIndex": 7,
  "ModifyIndex": 7,
  "JobModifyIndex": 7
}

Field Reference

Status: The job's current state. It can have one of the following values:
- pending: The job is currently waiting on scheduling.
- running: The job has non-terminal allocations.
- dead: All of the job's allocations and evaluations are terminal.
Type: The type of job in terms of scheduling. It can have one of the following values:
- service: Allocations are intended to remain alive.
- batch: Allocations are intended to exit.
- system: Each client in the datacenter and node pool gets an allocation.

Read Job Submission

This endpoint reads original source information about a specific version of a single job. The data this endpoint provides is only available if it was provided with the original job during job registration. Only the most recent 6 job source files are retained.

Method	Path	Produces
`GET`	`/v1/job/:job_id/submission`	`application/json`

Parameters

:job_id (string: <required>) - Specifies the ID of the job. This is specified as part of the path.
version (int: <required>) - Specifies the version number of the job for which to retrieve the original source information. This is specified as a query string parameter.
namespace (string: "default") - Specifies the target namespace. If ACL is enabled, this value must match a namespace that the token is allowed to access. This is specified as a query string parameter.

Sample Request

nomad operator api /v1/job/my-job/submission?version=42

Sample Response

{
  "Format": "hcl2",
  "JobIndex": 11,
  "JobID": "myjob",
  "Namespace": "default",
  "Source": "variable \"X\" {\n  type = string\n}\n\nvariable \"Y\" {\n  type = number\n}\n\nvariable \"Z\" {\n  type = bool\n}\n  \njob \"myjob\" {\n  type = \"sysbatch\"\n  \n  meta {\n    nomad_discard_job_source = false\n  }\n\n  group \"group\" {\n    task \"task\" {\n      driver = \"raw_exec\"\n\n      config {\n        command = \"echo\"\n        args = [\"X ${var.X}, Y ${var.Y}, Z ${var.Z}\"]\n      }\n\n      resources {\n        cpu    = 10\n        memory = 16\n      }\n    }\n  }\n}\n",
  "VariableFlags": {
    "Z": "true",
    "X": "x",
    "Y": "2"
  },
  "Variables": "",
  "Version": 0
}

Field Reference

JobID: The ID of the job associated with the original job file.
Format: The file format of the original job file. One of hcl2 or json.
Source: The literal content of the original job file.
VariableFlags: The key-value pairs of HCL variables as submitted via -var command line arguments when submitting the job via CLI.
Variables: The content of the variables form when submitting the job via the WebUI.
Version: The version of the job this submission source is associated with.

List Job Versions

This endpoint reads information about all versions of a job.

Method	Path	Produces
`GET`	`/v1/job/:job_id/versions`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`YES`	`namespace:read-job`

Parameters

diffs (bool: false) - Specifies if the Diffs field should be populated, containing the structured diff between the current and last job version. This is specified as a query string parameter.
diff_version (int: <optional>): Specifies the version to to compare against the current version when you create the structured diff for a job with diffs=true. This is specified as a query string parameter.
:job_id (string: <required>) - Specifies the ID of the job. This is specified as part of the path.
namespace (string: "default") - Specifies the target namespace. If ACL is enabled, this value must match a namespace that the token is allowed to access. This is specified as a query string parameter.

Sample Request

$ curl \
    https://localhost:4646/v1/job/my-job/versions

Sample Response

{
  "Diffs": null,
  "Index": 51,
  "KnownLeader": true,
  "LastContact": 0,
  "Versions": [
    {
      "Affinities": null,
      "AllAtOnce": false,
      "Constraints": null,
      "CreateIndex": 44,
      "Datacenters": ["dc1"],
      "Dispatched": false,
      "ID": "example",
      "JobModifyIndex": 44,
      "Meta": null,
      "ModifyIndex": 51,
      "Multiregion": null,
      "Name": "example",
      "Namespace": "default",
      "NomadTokenID": "",
      "NodePool": "prod",
      "ParameterizedJob": null,
      "ParentID": "",
      "Payload": null,
      "Periodic": null,
      "Priority": 50,
      "Region": "global",
      "Spreads": null,
      "Stable": true,
      "Status": "running",
      "StatusDescription": "",
      "Stop": false,
      "SubmitTime": 1608304897537638400,
      "TaskGroups": [
        {
          "Affinities": null,
          "Constraints": null,
          "Count": 1,
          "Disconnect", null,
          "EphemeralDisk": {
            "Migrate": false,
            "SizeMB": 300,
            "Sticky": false
          },
          "MaxClientDisconnect": 300000000000,
          "Meta": null,
          "Migrate": {
            "HealthCheck": "checks",
            "HealthyDeadline": 300000000000,
            "MaxParallel": 1,
            "MinHealthyTime": 10000000000
          },
          "Name": "cache",
          "Networks": [
            {
              "CIDR": "",
              "DNS": null,
              "Device": "",
              "DynamicPorts": [
                {
                  "HostNetwork": "default",
                  "Label": "db",
                  "To": 6379,
                  "Value": 0
                }
              ],
              "IP": "",
              "MBits": 0,
              "Mode": "",
              "ReservedPorts": null
            }
          ],
          "ReschedulePolicy": {
            "Attempts": 0,
            "Delay": 30000000000,
            "DelayFunction": "exponential",
            "Interval": 0,
            "MaxDelay": 3600000000000,
            "Unlimited": true
          },
          "RestartPolicy": {
            "Attempts": 2,
            "Delay": 15000000000,
            "Interval": 1800000000000,
            "Mode": "fail"
          },
          "Scaling": null,
          "Services": null,
          "ShutdownDelay": null,
          "Spreads": null,
          "StopAfterClientDisconnect": null,
          "Tasks": [
            {
              "Affinities": null,
              "Artifacts": null,
              "CSIPluginConfig": null,
              "Config": {
                "image": "redis:7",
                "ports": ["db"]
              },
              "Constraints": null,
              "DispatchPayload": null,
              "Driver": "docker",
              "Env": null,
              "KillSignal": "",
              "KillTimeout": 5000000000,
              "Kind": "",
              "Leader": false,
              "Lifecycle": null,
              "LogConfig": {
                "Disabled": false,
                "MaxFileSizeMB": 10,
                "MaxFiles": 10
              },
              "Meta": null,
              "Name": "redis",
              "Resources": {
                "CPU": 500,
                "Devices": null,
                "DiskMB": 0,
                "IOPS": 0,
                "MemoryMB": 256,
                "Networks": null
              },
              "RestartPolicy": {
                "Attempts": 2,
                "Delay": 15000000000,
                "Interval": 1800000000000,
                "Mode": "fail"
              },
              "ScalingPolicies": null,
              "Services": null,
              "ShutdownDelay": 0,
              "Templates": null,
              "User": "",
              "Vault": null,
              "VolumeMounts": null
            }
          ],
          "Update": {
            "AutoPromote": false,
            "AutoRevert": false,
            "Canary": 0,
            "HealthCheck": "checks",
            "HealthyDeadline": 300000000000,
            "MaxParallel": 1,
            "MinHealthyTime": 10000000000,
            "ProgressDeadline": 600000000000,
            "Stagger": 30000000000
          },
          "Volumes": null
        }
      ],
      "Type": "service",
      "Update": {
        "AutoPromote": false,
        "AutoRevert": false,
        "Canary": 0,
        "HealthCheck": "",
        "HealthyDeadline": 0,
        "MaxParallel": 1,
        "MinHealthyTime": 0,
        "ProgressDeadline": 0,
        "Stagger": 30000000000
      },
      "VaultNamespace": "",
      "Version": 0
    }
  ]
}

$ curl \
    https://localhost:4646/v1/job/my-job/versions?diffs=true

{
  "Diffs": [
    {
      "Fields": null,
      "ID": "example",
      "Objects": null,
      "TaskGroups": [
        {
          "Fields": null,
          "Name": "cache",
          "Objects": null,
          "Tasks": [
            {
              "Annotations": null,
              "Fields": [
                {
                  "Annotations": null,
                  "Name": "Env[foo]",
                  "New": "bar",
                  "Old": "",
                  "Type": "Added"
                }
              ],
              "Name": "redis",
              "Objects": null,
              "Type": "Edited"
            }
          ],
          "Type": "Edited",
          "Updates": null
        }
      ],
      "Type": "Edited"
    }
  ],
  "Index": 26,
  "KnownLeader": true,
  "LastContact": 0,
  "Versions": [
    {
      "Affinities": null,
      "AllAtOnce": false,
      "Constraints": null,
      "CreateIndex": 10,
      "Datacenters": [
        "dc1"
      ],
      "Dispatched": false,
      "ID": "example",
      "JobModifyIndex": 16,
      "Meta": null,
      "ModifyIndex": 26,
      "Multiregion": null,
      "Name": "example",
      "Namespace": "default",
      "NodePool": "prod",
      "NomadTokenID": "",
      "ParameterizedJob": null,
      "ParentID": "",
      "Payload": null,
      "Periodic": null,
      "Priority": 50,
      "Region": "global",
      "Spreads": null,
      "Stable": true,
      "Status": "running",
      "StatusDescription": "",
      "Stop": false,
      "SubmitTime": 1608316675000588800,
      "TaskGroups": [
        {
          "Affinities": null,
          "Constraints": null,
          "Count": 1,
          "Disconnect": null,
          "EphemeralDisk": {
            "Migrate": false,
            "SizeMB": 300,
            "Sticky": false
          },
          "MaxClientDisconnect": null,
          "Meta": null,
          "Migrate": {
            "HealthCheck": "checks",
            "HealthyDeadline": 300000000000,
            "MaxParallel": 1,
            "MinHealthyTime": 10000000000
          },
          "Name": "cache",
          "Networks": [
            {
              "CIDR": "",
              "DNS": null,
              "Device": "",
              "DynamicPorts": [
                {
                  "HostNetwork": "default",
                  "Label": "db",
                  "To": 6379,
                  "Value": 0
                }
              ],
              "IP": "",
              "MBits": 0,
              "Mode": "",
              "ReservedPorts": null
            }
          ],
          "ReschedulePolicy": {
            "Attempts": 0,
            "Delay": 30000000000,
            "DelayFunction": "exponential",
            "Interval": 0,
            "MaxDelay": 3600000000000,
            "Unlimited": true
          },
          "RestartPolicy": {
            "Attempts": 2,
            "Delay": 15000000000,
            "Interval": 1800000000000,
            "Mode": "fail"
          },
          "Scaling": null,
          "Services": null,
          "ShutdownDelay": null,
          "Spreads": null,
          "StopAfterClientDisconnect": null,
          "Tasks": [
            {
              "Affinities": null,
              "Artifacts": null,
              "CSIPluginConfig": null,
              "Config": {
                "image": "redis:7",
                "ports": [
                  "db"
                ]
              },
              "Constraints": null,
              "DispatchPayload": null,
              "Driver": "docker",
              "Env": {
                "foo": "bar"
              },
              "KillSignal": "",
              "KillTimeout": 5000000000,
              "Kind": "",
              "Leader": false,
              "Lifecycle": null,
              "LogConfig": {
                "Disabled": false,
                "MaxFileSizeMB": 10,
                "MaxFiles": 10
              },
              "Meta": null,
              "Name": "redis",
              "Resources": {
                "CPU": 500,
                "Devices": null,
                "DiskMB": 0,
                "IOPS": 0,
                "MemoryMB": 256,
                "Networks": null
              },
              "RestartPolicy": {
                "Attempts": 2,
                "Delay": 15000000000,
                "Interval": 1800000000000,
                "Mode": "fail"
              },
              "ScalingPolicies": null,
              "Services": null,
              "ShutdownDelay": 0,
              "Templates": null,
              "User": "",
              "Vault": null,
              "VolumeMounts": null
            }
          ],
          "Update": {
            "AutoPromote": false,
            "AutoRevert": false,
            "Canary": 0,
            "HealthCheck": "checks",
            "HealthyDeadline": 300000000000,
            "MaxParallel": 1,
            "MinHealthyTime": 10000000000,
            "ProgressDeadline": 600000000000,
            "Stagger": 30000000000
          },
          "Volumes": null
        }
      ],
      "Type": "service",
      "Update": {
        "AutoPromote": false,
        "AutoRevert": false,
        "Canary": 0,
        "HealthCheck": "",
        "HealthyDeadline": 0,
        "MaxParallel": 1,
        "MinHealthyTime": 0,
        "ProgressDeadline": 0,
        "Stagger": 30000000000
      },
      "VaultNamespace": "",
      "Version": 1
    },
    {
      "Affinities": null,
      "AllAtOnce": false,
      "Constraints": null,
      "CreateIndex": 10,
      "Datacenters": [
        "dc1"
      ],
      "Dispatched": false,
      "ID": "example",
      "JobModifyIndex": 10,
      "Meta": null,
      "ModifyIndex": 10,
      "Multiregion": null,
      "Name": "example",
      "Namespace": "default",
      "NodePool": "prod",
      "NomadTokenID": "",
      "ParameterizedJob": null,
      "ParentID": "",
      "Payload": null,
      "Periodic": null,
      "Priority": 50,
      "Region": "global",
      "Spreads": null,
      "Stable": false,
      "Status": "pending",
      "StatusDescription": "",
      "Stop": false,
      "SubmitTime": 1608316662268190500,
      "TaskGroups": [
        {
          "Affinities": null,
          "Constraints": null,
          "Count": 1,
          "Disconnect": null,
          "EphemeralDisk": {
            "Migrate": false,
            "SizeMB": 300,
            "Sticky": false
          },
          "MaxClientDisconnect": null,
          "Meta": null,
          "Migrate": {
            "HealthCheck": "checks",
            "HealthyDeadline": 300000000000,
            "MaxParallel": 1,
            "MinHealthyTime": 10000000000
          },
          "Name": "cache",
          "Networks": [
            {
              "CIDR": "",
              "DNS": null,
              "Device": "",
              "DynamicPorts": [
                {
                  "HostNetwork": "default",
                  "Label": "db",
                  "To": 6379,
                  "Value": 0
                }
              ],
              "IP": "",
              "MBits": 0,
              "Mode": "",
              "ReservedPorts": null
            }
          ],
          "ReschedulePolicy": {
            "Attempts": 0,
            "Delay": 30000000000,
            "DelayFunction": "exponential",
            "Interval": 0,
            "MaxDelay": 3600000000000,
            "Unlimited": true
          },
          "RestartPolicy": {
            "Attempts": 2,
            "Delay": 15000000000,
            "Interval": 1800000000000,
            "Mode": "fail"
          },
          "Scaling": null,
          "Services": null,
          "ShutdownDelay": null,
          "Spreads": null,
          "StopAfterClientDisconnect": null,
          "Tasks": [
            {
              "Affinities": null,
              "Artifacts": null,
              "CSIPluginConfig": null,
              "Config": {
                "image": "redis:7",
                "ports": [
                  "db"
                ]
              },
              "Constraints": null,
              "DispatchPayload": null,
              "Driver": "docker",
              "Env": null,
              "KillSignal": "",
              "KillTimeout": 5000000000,
              "Kind": "",
              "Leader": false,
              "Lifecycle": null,
              "LogConfig": {
                "Disabled": false,
                "MaxFileSizeMB": 10,
                "MaxFiles": 10
              },
              "Meta": null,
              "Name": "redis",
              "Resources": {
                "CPU": 500,
                "Devices": null,
                "DiskMB": 0,
                "IOPS": 0,
                "MemoryMB": 256,
                "Networks": null
              },
              "RestartPolicy": {
                "Attempts": 2,
                "Delay": 15000000000,
                "Interval": 1800000000000,
                "Mode": "fail"
              },
              "ScalingPolicies": null,
              "Services": null,
              "ShutdownDelay": 0,
              "Templates": null,
              "User": "",
              "Vault": null,
              "VolumeMounts": null
            }
          ],
          "Update": {
            "AutoPromote": false,
            "AutoRevert": false,
            "Canary": 0,
            "HealthCheck": "checks",
            "HealthyDeadline": 300000000000,
            "MaxParallel": 1,
            "MinHealthyTime": 10000000000,
            "ProgressDeadline": 600000000000,
            "Stagger": 30000000000
          },
          "Volumes": null
        }
      ],
      "Type": "service",
      "Update": {
        "AutoPromote": false,
        "AutoRevert": false,
        "Canary": 0,
        "HealthCheck": "",
        "HealthyDeadline": 0,
        "MaxParallel": 1,
        "MinHealthyTime": 0,
        "ProgressDeadline": 0,
        "Stagger": 30000000000
      },
      "VaultNamespace": "",
      "Version": 0
    }
  ]
}

List Job Allocations

This endpoint reads information about a single job's allocations.

Method	Path	Produces
`GET`	`/v1/job/:job_id/allocations`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`YES`	`namespace:read-job`

Parameters

:job_id (string: <required>) - Specifies the ID of the job. This is specified as part of the path.
all (bool: false) - Specifies whether the list of allocations should include allocations from a previously registered job with the same ID. This is possible if the job is deregistered and re-registered.
namespace (string: "default") - Specifies the target namespace. If ACL is enabled, this value must match a namespace that the token is allowed to access. This is specified as a query string parameter.

Sample Request

$ curl \
    https://localhost:4646/v1/job/my-job/allocations

Sample Response

[
  {
    "ID": "ed344e0a-7290-d117-41d3-a64f853ca3c2",
    "EvalID": "a9c5effc-2242-51b2-f1fe-054ee11ab189",
    "Name": "example.cache[0]",
    "NodeID": "cb1f6030-a220-4f92-57dc-7baaabdc3823",
    "PreviousAllocation": "516d2753-0513-cfc7-57ac-2d6fac18b9dc",
    "NextAllocation": "cd13d9b9-4f97-7184-c88b-7b451981616b",
    "RescheduleTracker": {
      "Events": [
        {
          "PrevAllocID": "516d2753-0513-cfc7-57ac-2d6fac18b9dc",
          "PrevNodeID": "9230cd3b-3bda-9a3f-82f9-b2ea8dedb20e",
          "RescheduleTime": 1517434161192946200,
          "Delay": 5000000000
        }
      ]
    },
    "JobID": "example",
    "TaskGroup": "cache",
    "DesiredStatus": "run",
    "DesiredDescription": "",
    "ClientStatus": "running",
    "ClientDescription": "",
    "TaskStates": {
      "redis": {
        "State": "running",
        "Failed": false,
        "StartedAt": "2017-05-25T23:41:23.240184101Z",
        "FinishedAt": "0001-01-01T00:00:00Z",
        "Events": [
          {
            "Type": "Received",
            "Time": 1495755675956923000,
            "FailsTask": false,
            "RestartReason": "",
            "SetupError": "",
            "DriverError": "",
            "ExitCode": 0,
            "Signal": 0,
            "Message": "",
            "KillTimeout": 0,
            "KillError": "",
            "KillReason": "",
            "StartDelay": 0,
            "DownloadError": "",
            "ValidationError": "",
            "DiskLimit": 0,
            "FailedSibling": "",
            "VaultError": "",
            "TaskSignalReason": "",
            "TaskSignal": "",
            "DriverMessage": ""
          },
          {
            "Type": "Task Setup",
            "Time": 1495755675957466400,
            "FailsTask": false,
            "RestartReason": "",
            "SetupError": "",
            "DriverError": "",
            "ExitCode": 0,
            "Signal": 0,
            "Message": "Building Task Directory",
            "KillTimeout": 0,
            "KillError": "",
            "KillReason": "",
            "StartDelay": 0,
            "DownloadError": "",
            "ValidationError": "",
            "DiskLimit": 0,
            "FailedSibling": "",
            "VaultError": "",
            "TaskSignalReason": "",
            "TaskSignal": "",
            "DriverMessage": ""
          },
          {
            "Type": "Driver",
            "Time": 1495755675970286800,
            "FailsTask": false,
            "RestartReason": "",
            "SetupError": "",
            "DriverError": "",
            "ExitCode": 0,
            "Signal": 0,
            "Message": "",
            "KillTimeout": 0,
            "KillError": "",
            "KillReason": "",
            "StartDelay": 0,
            "DownloadError": "",
            "ValidationError": "",
            "DiskLimit": 0,
            "FailedSibling": "",
            "VaultError": "",
            "TaskSignalReason": "",
            "TaskSignal": "",
            "DriverMessage": "Downloading image redis:7"
          },
          {
            "Type": "Started",
            "Time": 1495755683227522000,
            "FailsTask": false,
            "RestartReason": "",
            "SetupError": "",
            "DriverError": "",
            "ExitCode": 0,
            "Signal": 0,
            "Message": "",
            "KillTimeout": 0,
            "KillError": "",
            "KillReason": "",
            "StartDelay": 0,
            "DownloadError": "",
            "ValidationError": "",
            "DiskLimit": 0,
            "FailedSibling": "",
            "VaultError": "",
            "TaskSignalReason": "",
            "TaskSignal": "",
            "DriverMessage": ""
          }
        ]
      }
    },
    "CreateIndex": 9,
    "ModifyIndex": 13,
    "CreateTime": 1495755675944527600,
    "ModifyTime": 1495755675944527600
  }
]

List Job Evaluations

This endpoint reads information about a single job's evaluations

Method	Path	Produces
`GET`	`/v1/job/:job_id/evaluations`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`YES`	`namespace:read-job`

Parameters

:job_id (string: <required>) - Specifies the ID of the job. This is specified as part of the path.
namespace (string: "default") - Specifies the target namespace. If ACL is enabled, this value must match a namespace that the token is allowed to access. This is specified as a query string parameter.

Sample Request

$ curl \
    https://localhost:4646/v1/job/my-job/evaluations

Sample Response

[
  {
    "ID": "a9c5effc-2242-51b2-f1fe-054ee11ab189",
    "Priority": 50,
    "Type": "service",
    "TriggeredBy": "job-register",
    "JobID": "example",
    "JobModifyIndex": 7,
    "NodeID": "",
    "NodeModifyIndex": 0,
    "Status": "complete",
    "StatusDescription": "",
    "Wait": 0,
    "NextEval": "",
    "PreviousEval": "",
    "BlockedEval": "",
    "FailedTGAllocs": null,
    "ClassEligibility": null,
    "EscapedComputedClass": false,
    "AnnotatePlan": false,
    "QueuedAllocations": {
      "cache": 0
    },
    "SnapshotIndex": 8,
    "CreateIndex": 8,
    "ModifyIndex": 10
  }
]

List Job Deployments

This endpoint lists a single job's deployments

Method	Path	Produces
`GET`	`/v1/job/:job_id/deployments`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`YES`	`namespace:read-job`

Parameters

:job_id (string: <required>) - Specifies the ID of the job. This is specified as part of the path.
all (bool: false) - Specifies whether the list of deployments should include deployments from a previously registered job with the same ID. This is possible if the job is deregistered and re-registered.
namespace (string: "default") - Specifies the target namespace. If ACL is enabled, this value must match a namespace that the token is allowed to access. This is specified as a query string parameter.

Sample Request

$ curl \
    https://localhost:4646/v1/job/my-job/deployments

Sample Response

[
  {
    "ID": "85ee4a9a-339f-a921-a9ef-0550d20b2c61",
    "JobID": "my-job",
    "JobVersion": 1,
    "JobModifyIndex": 19,
    "JobCreateIndex": 7,
    "TaskGroups": {
      "cache": {
        "AutoRevert": true,
        "Promoted": false,
        "PlacedCanaries": [
          "d0ad0808-2765-abf6-1e15-79fb7fe5a416",
          "38c70cd8-81f2-1489-a328-87bb29ec0e0f"
        ],
        "DesiredCanaries": 2,
        "DesiredTotal": 3,
        "PlacedAllocs": 2,
        "HealthyAllocs": 2,
        "UnhealthyAllocs": 0
      }
    },
    "Status": "running",
    "StatusDescription": "Deployment is running",
    "CreateIndex": 21,
    "ModifyIndex": 25
  },
  {
    "ID": "fb6070fb-4a44-e255-4e6f-8213eba3871a",
    "JobID": "my-job",
    "JobVersion": 0,
    "JobModifyIndex": 7,
    "JobCreateIndex": 7,
    "TaskGroups": {
      "cache": {
        "AutoRevert": true,
        "Promoted": false,
        "PlacedCanaries": null,
        "DesiredCanaries": 0,
        "DesiredTotal": 3,
        "PlacedAllocs": 3,
        "HealthyAllocs": 3,
        "UnhealthyAllocs": 0
      }
    },
    "Status": "successful",
    "StatusDescription": "Deployment completed successfully",
    "CreateIndex": 9,
    "ModifyIndex": 17
  }
]

Read Job's Most Recent Deployment

This endpoint returns a single job's most recent deployment.

Method	Path	Produces
`GET`	`/v1/job/:job_id/deployment`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`YES`	`namespace:read-job`

Parameters

:job_id (string: <required>) - Specifies the ID of the job. This is specified as part of the path.
namespace (string: "default") - Specifies the target namespace. If ACL is enabled, this value must match a namespace that the token is allowed to access. This is specified as a query string parameter.

Sample Request

$ curl \
    https://localhost:4646/v1/job/my-job/deployment

Sample Response

{
  "ID": "85ee4a9a-339f-a921-a9ef-0550d20b2c61",
  "JobID": "my-job",
  "JobVersion": 1,
  "JobModifyIndex": 19,
  "JobCreateIndex": 7,
  "TaskGroups": {
    "cache": {
      "AutoRevert": true,
      "Promoted": false,
      "PlacedCanaries": [
        "d0ad0808-2765-abf6-1e15-79fb7fe5a416",
        "38c70cd8-81f2-1489-a328-87bb29ec0e0f"
      ],
      "DesiredCanaries": 2,
      "DesiredTotal": 3,
      "PlacedAllocs": 2,
      "HealthyAllocs": 2,
      "UnhealthyAllocs": 0
    }
  },
  "Status": "running",
  "StatusDescription": "Deployment is running",
  "CreateIndex": 21,
  "ModifyIndex": 25
}

Read Job Summary

This endpoint reads summary information about a job.

Method	Path	Produces
`GET`	`/v1/job/:job_id/summary`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`YES`	`namespace:read-job`

Parameters

:job_id (string: <required>) - Specifies the ID of the job. This is specified as part of the path.
namespace (string: "default") - Specifies the target namespace. If ACL is enabled, this value must match a namespace that the token is allowed to access. This is specified as a query string parameter.

Sample Request

$ curl \
    https://localhost:4646/v1/job/my-job/summary

Sample Response

{
  "JobID": "example",
  "Summary": {
    "cache": {
      "Queued": 0,
      "Complete": 0,
      "Failed": 0,
      "Running": 1,
      "Starting": 0,
      "Lost": 0
    }
  },
  "Children": {
    "Pending": 0,
    "Running": 0,
    "Dead": 0
  },
  "CreateIndex": 7,
  "ModifyIndex": 13
}

Update Existing Job

This endpoint registers a new job or updates an existing job.

Method	Path	Produces
`POST`	`/v1/job/:job_id`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`NO`	`namespace:submit-job` `namespace:sentinel-override` if `PolicyOverride` set

Parameters

:job_id (string: <required>) - Specifies the ID of the job. This is specified as part of the path.
Job (Job: <required>) - Specifies the JSON definition of the job.
Submission (JobSubmission: <optional>) - Specifies the original HCL/HCL2/JSON definition of the job. This data is useful for reference only, it is not considered for the actual scheduling of Job.
EnforceIndex (bool: false) - If set, the job will only be registered if the passed JobModifyIndex matches the current job's index. If the index is zero, the register only occurs if the job is new. This paradigm allows check-and-set style job updating.
EvalPriority (int: 0) - Override the priority of the evaluations produced as a result of this job update. By default, this is set to the priority of the job.
JobModifyIndex (int: 0) - Specifies the JobModifyIndex to enforce the current job is at.
PolicyOverride (bool: false) - If set, any soft mandatory Sentinel policies will be overridden. This allows a job to be registered when it would be denied by policy.
namespace (string: "default") - Specifies the target namespace. If ACL is enabled, this value must match a namespace that the token is allowed to access. This is specified as a query string parameter.

Sample Payload

{
  "Job": {
    // ...
  },
  "EnforceIndex": true,
  "JobModifyIndex": 4
}

Sample Request

$ curl \
    --request POST \
    --data @payload.json \
    https://localhost:4646/v1/job/my-job

Sample Response

{
  "EvalID": "d092fdc0-e1fd-2536-67d8-43af8ca798ac",
  "EvalCreateIndex": 35,
  "JobModifyIndex": 34
}

Dispatch Job

This endpoint dispatches a new instance of a parameterized job.

Method	Path	Produces
`POST`	`/v1/job/:job_id/dispatch`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`NO`	`namespace:dispatch-job`

Parameters

:job_id (string: <required>) - Specifies the ID of the job. This is specified as part of the path.
idempotency_token (string: "") - Optional identifier used to prevent more than one instance of the job from being dispatched. This is specified as a URL query parameter.
IdPrefixTemplate (string: "") - Optional prefix added to dispatched job IDs.
Payload (string: "") - Specifies a base64 encoded string containing the payload. This is limited to 16384 bytes (16KiB).
Meta (meta<string|string>: nil) - Specifies arbitrary metadata to pass to the job.
namespace (string: "default") - Specifies the target namespace. If ACL is enabled, this value must match a namespace that the token is allowed to access. This is specified as a query string parameter.

Sample Payload

{
  "Payload": "A28C3==",
  "Meta": {
    "key": "Value"
  }
}

Sample Request

$ curl \
    --request POST \
    --data @payload.json \
    https://localhost:4646/v1/job/my-job/dispatch

Sample Response

{
  "Index": 13,
  "JobCreateIndex": 12,
  "EvalCreateIndex": 13,
  "EvalID": "e5f55fac-bc69-119d-528a-1fc7ade5e02c",
  "DispatchedJobID": "example/dispatch-1485408778-81644024"
}

Dispatch Job with raw Payload body

This endpoint dispatches a new instance of a parameterized job using the full request body as the Payload as described in Dispatch Job.

Method	Path	Produces
`POST`	`/v1/job/:job_id/dispatch/payload`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`NO`	`namespace:dispatch-job`

Parameters

:job_id (string: <required>) - Specifies the ID of the job. This is specified as part of the path.

Sample Payload

any HTTP request body, JSON or otherwise, becomes the dispatch Payload

Sample Request

$ curl \
    --request POST \
    --data 'anything at all' \
    https://localhost:4646/v1/job/my-job/dispatch

Sample Response

{
  "DispatchedJobID": "param/dispatch-1730920906-81821d1f",
  "EvalCreateIndex": 179,
  "EvalID": "5e973383-8d59-3f33-4496-72112a882605",
  "Index": 179,
  "JobCreateIndex": 178
}

Revert to older Job Version

This endpoint reverts the job to an older version.

Method	Path	Produces
`POST`	`/v1/job/:job_id/revert`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`NO`	`namespace:submit-job`

Parameters

JobID (string: <required>) - Specifies the ID of the job. This is specified as part of the path.
JobVersion (integer: 0) - Specifies the job version to revert to. Use either this parameter or TaggedVersion, but do not use both.
TaggedVersion (string: "") - Specifies the tag name of the job version you want to revert to. Use either this parameter or JobVersion, but do not use both.
EnforcePriorVersion (integer: nil) - Optional value specifying the current job's version. This is checked and acts as a check-and-set value before reverting to the specified job.
namespace (string: "default") - Specifies the target namespace. If ACL is enabled, this value must match a namespace that the token is allowed to access. This is specified as a query string parameter.

Sample Payload

This example specifies the version.

{
  "JobID": "my-job",
  "JobVersion": 2
}

This example specifies the tagged version.

{
  "JobID": "my-job",
  "TaggedVersion": "golden-version"
}

Sample Request

$ curl \
    --request POST \
    --data @payload.json \
    https://localhost:4646/v1/job/my-job/revert

Sample Response

{
  "EvalID": "d092fdc0-e1fd-2536-67d8-43af8ca798ac",
  "EvalCreateIndex": 35,
  "JobModifyIndex": 34
}

Set Job Stability

This endpoint sets the job's stability.

Method	Path	Produces
`POST`	`/v1/job/:job_id/stable`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`NO`	`namespace:submit-job`

Parameters

JobID (string: <required>) - Specifies the ID of the job. This is specified as part of the path.
JobVersion (integer: 0) - Specifies the job version to set the stability on.
Stable (bool: false) - Specifies whether the job should be marked as stable or not.
namespace (string: "default") - Specifies the target namespace. If ACL is enabled, this value must match a namespace that the token is allowed to access. This is specified as a query string parameter.

Sample Payload

{
  "JobID": "my-job",
  "JobVersion": 2,
  "Stable": true
}

Sample Request

$ curl \
    --request POST \
    --data @payload.json \
    https://localhost:4646/v1/job/my-job/stable

Sample Response

{
  "JobModifyIndex": 34
}

Create Job Evaluation

This endpoint creates a new evaluation for the given job. This can be used to force run the scheduling logic if necessary. Since Nomad 0.8.4, this endpoint supports a JSON payload with additional options. Support for calling this end point without a JSON payload will be removed in Nomad 0.9.

Method	Path	Produces
`POST`	`/v1/job/:job_id/evaluate`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`NO`	`namespace:submit-job`

Parameters

:job_id (string: <required>) - Specifies the ID of the job. This is specified as part of the path.
JobID (string: <required>) - Specify the ID of the job in the JSON payload
EvalOptions (<optional>) - Specify additional options to be used during the forced evaluation.
- ForceReschedule (bool: false) - If set, failed allocations of the job are rescheduled immediately. This is useful for operators to force immediate placement even if the failed allocations are past their rescheduling limit, or are delayed by several hours because the allocation's reschedule policy has exponential delay.
namespace (string: "default") - Specifies the target namespace. If ACL is enabled, this value must match a namespace that the token is allowed to access. This is specified as a query string parameter.

Sample Payload

{
  "JobID": "my-job",
  "EvalOptions": {
    "ForceReschedule": true
  }
}

Sample Request

$ curl \
    --request POST \
    -d @sample.json \
    https://localhost:4646/v1/job/my-job/evaluate

Sample Response

{
  "EvalID": "d092fdc0-e1fd-2536-67d8-43af8ca798ac",
  "EvalCreateIndex": 35,
  "JobModifyIndex": 34
}

Create Job Plan

This endpoint invokes a dry-run of the scheduler for the job.

Method	Path	Produces
`POST`	`/v1/job/:job_id/plan`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`NO`	`namespace:submit-job` `namespace:sentinel-override` if `PolicyOverride` set

Parameters

:job_id (string: <required>) - Specifies the ID of the job. This is specified as part of the path.
Job (string: <required>) - Specifies the JSON definition of the job.
Diff (bool: false) - Specifies whether the diff structure between the submitted and server side version of the job should be included in the response.
PolicyOverride (bool: false) - If set, any soft mandatory Sentinel policies will be overridden. This allows a job to be registered when it would be denied by policy.
namespace (string: "default") - Specifies the target namespace. If ACL is enabled, this value must match a namespace that the token is allowed to access. This is specified as a query string parameter.

Sample Payload

{
  "Job": {
    // ...
  },
  "Diff": true,
  "PolicyOverride": false
}

Sample Request

$ curl \
    --request POST \
    --data @payload.json \
    https://localhost:4646/v1/job/my-job/plan

Sample Response

{
  "Index": 0,
  "NextPeriodicLaunch": "0001-01-01T00:00:00Z",
  "Warnings": "",
  "Diff": {
    "Type": "Added",
    "TaskGroups": [
      {
        "Updates": {
          "create": 1
        },
        "Type": "Added",
        "Tasks": [
          {
            "Type": "Added",
            "Objects": ["..."],
            "Name": "redis",
            "Fields": [
              {
                "Type": "Added",
                "Old": "",
                "New": "docker",
                "Name": "Driver",
                "Annotations": null
              },
              {
                "Type": "Added",
                "Old": "",
                "New": "5000000000",
                "Name": "KillTimeout",
                "Annotations": null
              }
            ],
            "Annotations": ["forces create"]
          }
        ],
        "Objects": ["..."],
        "Name": "cache",
        "Fields": ["..."]
      }
    ],
    "Objects": [
      {
        "Type": "Added",
        "Objects": null,
        "Name": "Datacenters",
        "Fields": ["..."]
      },
      {
        "Type": "Added",
        "Objects": null,
        "Name": "Constraint",
        "Fields": ["..."]
      },
      {
        "Type": "Added",
        "Objects": null,
        "Name": "Update",
        "Fields": ["..."]
      }
    ],
    "ID": "example",
    "Fields": ["..."]
  },
  "CreatedEvals": [
    {
      "ModifyIndex": 0,
      "CreateIndex": 0,
      "SnapshotIndex": 0,
      "AnnotatePlan": false,
      "EscapedComputedClass": false,
      "NodeModifyIndex": 0,
      "NodeID": "",
      "JobModifyIndex": 0,
      "JobID": "example",
      "TriggeredBy": "job-register",
      "Type": "batch",
      "Priority": 50,
      "ID": "312e6a6d-8d01-0daf-9105-14919a66dba3",
      "Status": "blocked",
      "StatusDescription": "created to place remaining allocations",
      "Wait": 0,
      "NextEval": "",
      "PreviousEval": "80318ae4-7eda-e570-e59d-bc11df134817",
      "BlockedEval": "",
      "FailedTGAllocs": null,
      "ClassEligibility": {
        "v1:7968290453076422024": true
      }
    }
  ],
  "JobModifyIndex": 0,
  "FailedTGAllocs": {
    "cache": {
      "CoalescedFailures": 3,
      "AllocationTime": 46415,
      "Scores": null,
      "NodesEvaluated": 1,
      "NodesFiltered": 0,
      "NodesAvailable": {
        "dc1": 1
      },
      "NodesInPool": 1,
      "ClassFiltered": null,
      "ConstraintFiltered": null,
      "NodesExhausted": 1,
      "ClassExhausted": null,
      "DimensionExhausted": {
        "cpu": 1
      }
    }
  },
  "Annotations": {
    "DesiredTGUpdates": {
      "cache": {
        "DestructiveUpdate": 0,
        "InPlaceUpdate": 0,
        "Stop": 0,
        "Migrate": 0,
        "Place": 11,
        "Ignore": 0
      }
    }
  }
}

Field Reference

Diff - A diff structure between the submitted job and the server side version. The top-level object is a Job Diff which contains Task Group Diffs, which in turn contain Task Diffs. Each of these objects then has Object and Field Diff structures embedded.
NextPeriodicLaunch - If the job being planned is periodic, this field will include the next launch time for the job.
CreatedEvals - A set of evaluations that were created as a result of the dry-run. These evaluations can signify a follow-up rolling update evaluation or a blocked evaluation.
JobModifyIndex - The JobModifyIndex of the server side version of this job.
FailedTGAllocs - A set of metrics to understand any allocation failures that occurred for the Task Group.
Annotations - Annotations include the DesiredTGUpdates, which tracks what the scheduler would do given enough resources for each Task Group.

Force New Periodic Instance

This endpoint forces a new instance of the periodic job. A new instance will be created even if it violates the job's prohibit_overlap settings. As such, this should be only used to immediately run a periodic job.

Method	Path	Produces
`POST`	`/v1/job/:job_id/periodic/force`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`NO`	`namespace:dispatch-job` or `namespace:submit-job`

Parameters

:job_id (string: <required>) - Specifies the ID of the job. This is specified as part of the path.

Sample Request

$ curl \
    --request POST \
    https://localhost:4646/v1/job/my-job/periodic/force

Sample Response

{
  "EvalCreateIndex": 7,
  "EvalID": "57983ddd-7fcf-3e3a-fd24-f699ccfb36f4"
}

Stop a Job

This endpoint deregisters a job, and stops all allocations part of it.

Method	Path	Produces
`DELETE`	`/v1/job/:job_id`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`NO`	`namespace:submit-job`

Parameters

:job_id (string: <required>) - Specifies the ID of the job. This is specified as part of the path.
eval_priority (int: 0) - Override the priority of the evaluations produced as a result of this job deregistration. By default, this is set to the priority of the job.
global (bool: false) - Stop a multi-region job in all its regions. By default, job stop will stop only a single region at a time. Ignored for single-region jobs.
purge (bool: false) - Specifies that the job should be stopped and purged immediately. This means the job will not be queryable after being stopped. If not set, the job will be purged by the garbage collector.
namespace (string: "default") - Specifies the target namespace. If ACL is enabled, this value must match a namespace that the token is allowed to access. This is specified as a query string parameter.
no_shutdown_delay (bool: false) - Ignore the group and task shutdown_delay configuration so that there is no delay between service deregistration and task shutdown. Note that using this flag will result in failed network connections to the allocations being stopped.

Sample Request

$ curl \
    --request DELETE \
    https://localhost:4646/v1/job/my-job?purge=true

Sample Response

{
  "EvalID": "d092fdc0-e1fd-2536-67d8-43af8ca798ac",
  "EvalCreateIndex": 35,
  "JobModifyIndex": 34
}

Read Job Scale Status

This endpoint reads scale information about a job.

Method	Path	Produces
`GET`	`/v1/job/:job_id/scale`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`YES`	`namespace:read-job-scaling` or `namespace:read-job`

Parameters

:job_id (string: <required>) - Specifies the ID of the job. This is specified as part of the path.
namespace (string: "default") - Specifies the target namespace. If ACL is enabled, this value must match a namespace that the token is allowed to access. This is specified as a query string parameter.

Sample Request

$ curl \
    https://localhost:4646/v1/job/my-job/scale

Sample Response

{
  "JobCreateIndex": 10,
  "JobID": "example",
  "Namespace": "default",
  "JobModifyIndex": 18,
  "JobStopped": false,
  "TaskGroups": {
    "cache": {
      "Desired": 1,
      "Events": null,
      "Healthy": 1,
      "Placed": 1,
      "Running": 0,
      "Unhealthy": 0
    }
  }
}

Scale Task Group

This endpoint performs a scaling action against a job. Currently, this endpoint supports scaling the count for a task group. This will return a 400 error if the job has an active deployment.

Method	Path	Produces
`POST`	`/v1/job/:job_id/scale`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`NO`	`namespace:scale-job` or `namespace:submit-job` `namespace:sentinel-override` if `PolicyOverride` set

Parameters

:job_id (string: <required>) - Specifies the ID of the job. This is specified as part of the path.
Count (int: <optional>) - Specifies the new task group count.
EnforceIndex (bool: false) - If set, the job will only be registered if the passed JobModifyIndex matches the current job's index. If the index is zero, the register only occurs if the job is new. This paradigm allows check-and-set style job updating.
Error (string: <optional>) - Description of the scale action, persisted as part of the scaling event. Indicates an error state preventing scaling; one of Message or Error must be provided.
JobModifyIndex (int: 0) - Specifies the JobModifyIndex to enforce the current job is at.
Message (string: <optional>) - Description of the scale action, persisted as part of the scaling event. Indicates information or reason for scaling; one of Message or Error must be provided.
Meta (json: <optional>) - JSON block that is persisted as part of the scaling event.
namespace (string: "default") - Specifies the target namespace. If ACL is enabled, this value must match a namespace that the token is allowed to access. This is specified as a query string parameter.
PolicyOverride (bool: false) - If set, any soft mandatory Sentinel policies will be overridden. This allows a job to be scaled when it would be denied by policy.
Target (json: required) - JSON map containing the target of the scaling operation. Must contain a field Group with the name of the task group that is the target of this scaling action.

Sample Payload

{
    "Count": 5,
    "Meta": {
        "metrics": [
            "cpu",
            "memory"
        ]
    },
    "Message": "metric did not satisfy SLA",
    "Target": {
        "Group": "cache"
    }
}

Sample Request

$ curl \
    --request POST \
    --data @payload.json \
    https://localhost:4646/v1/job/example/scale

Sample Response

This is the same payload as returned by job update. EvalCreateIndex and EvalID will only be present if the scaling operation resulted in the creation of an evaluation.

{
  "EvalCreateIndex": 45,
  "EvalID": "116f3ede-f6a5-f6e7-2d0e-1fda136390f0",
  "Index": 45,
  "JobModifyIndex": 44,
  "KnownLeader": false,
  "LastContact": 0,
  "Warnings": ""
}

Job Services

The endpoint is used to read all services registered within Nomad belonging to the passed job ID.

Method	Path	Produces
`GET`	`/v1/job/:job_id/services`	`application/json`

The table below shows this endpoint's support for blocking queries, consistency modes and required ACLs.

Blocking Queries	Consistency Modes	ACL Required
`YES`	`all`	`namespace:read-job`

Parameters

:job_id (string: <required>) - Specifies the ID of the job. This is specified as part of the path.
namespace (string: "default") - Specifies the target namespace.

Sample Request

$ curl \
    https://localhost:4646/v1/job/example/services

Sample Response

[
  {
    "Address": "127.0.0.1",
    "AllocID": "177160af-26f6-619f-9c9f-5e46d1104395",
    "CreateIndex": 14,
    "Datacenter": "dc1",
    "ID": "_nomad-task-177160af-26f6-619f-9c9f-5e46d1104395-redis-example-cache-redis-db",
    "JobID": "example",
    "ModifyIndex": 24,
    "Namespace": "default",
    "NodeID": "7406e90b-de16-d118-80fe-60d0f2730cb3",
    "Port": 29702,
    "ServiceName": "example-cache-redis",
    "Tags": [
      "db",
      "cache"
    ]
  }
]

List Job Actions

This endpoint lists the actions available to tasks within a job.

Method	Path	Produces
`GET`	`/v1/job/:job_id/actions`	`application/json`

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`NO`	`namespace:read-job`

Parameters

:job_id (string: <required>) - Specifies the ID of the job. This is specified as part of the path.

Sample Request

$ nomad operator api '/v1/job/my-job/actions'

Sample Response

[
  {
    "Args": [
      "-s",
      "wttr.in/Toronto?format=3"
    ],
    "Command": "/usr/bin/curl",
    "Name": "weather",
    "TaskGroupName": "group1",
    "TaskName": "task"
  },
  {
    "Args": [
      "-c",
      "nomad alloc status ${NOMAD_ALLOC_ID}"
    ],
    "Command": "/bin/sh",
    "Name": "get-alloc-info",
    "TaskGroupName": "group2",
    "TaskName": "task"
  },
]

Run Action

This endpoint executes a predefined action from a job in the context of a specific task within an allocation. It opens a WebSocket to transmit output from the running action.

Method	Path	Produces
`WebSocket`	`/v1/job/:job_id/action`	WebSocket JSON streams

The table below shows this endpoint's support for blocking queries and required ACLs.

Blocking Queries	ACL Required
`NO`	`namespace:alloc-exec` (and `namespace:alloc-node-exec` if task driver does not support file system isolation)

Parameters

:job_id (string: <required>) - Specifies the ID of the job containing the action. This is specified as part of the path.
action (string: <required>) - Specifies the name of the action to be executed, as defined within the job's task. Specified as a query parameter.
alloc_id (string: <required>) - Specifies the UUID of the target allocation. Specified as a query parameter.
task (string: <required>) - Specifies the task where the action is defined. Specified as a query parameter.
tty (bool: false) - Specifies whether a TTY is allocated for this action. Specified as a query parameter.
ws_handshake (bool: false) - Specifies whether to expect the authentication token in the first frame, as a query parameter.

WebSocket Upgrade Request

Actions are executed with a WebSocket upgrade request. The request headers must include the standard WebSocket upgrade parameters. Example:

$ curl \
  -X GET \
  -H 'Connection: Upgrade' \
  -H 'Upgrade: websocket' \
  -H 'Sec-Websocket-Version: 13' \
  -H 'Sec-Websocket-Key: x3JJHMbDL1EzLkh9GBhXDw==' \
  'http://127.0.0.1:4646/v1/job/actions-demo/action?action=weather&allocID=8614ed07-425f-889f-170d-dd2716e0e01f&task=task&tty=true'

$ nomad operator api \
-H "Connection: Upgrade" \
-H "Upgrade: websocket" \
-H "Sec-WebSocket-Version: 13" \
-H "Sec-WebSocket-Key: x3JJHMbDL1EzLkh9GBhXDw==" \
'/v1/job/actions-demo/action?action=weather&allocID=8614ed07-425f-889f-170d-dd2716e0e01f&task=task&tty=true'

Request Frames

Unlike alloc exec, Actions do not take input in the form of request frames using stdin. Instead, the name of the action is passed as a query parameter and the associated input is handled on the allocation apart from the stream.

When ?ws_handshake=true, the first request frame must contain the authentication token. Similarly, when ?tty=true, a tty_size frame may be provided to indicate a resize.

The following are valid input frames:

# sending authentication token
{"version":1,"auth_token":"fc3c1968-8d31-5c50-9617-3db2e19ef32e"}
 
# indicating that TTY was resized
{"tty_size": {"height": <characters>, "width": <characters>}}

Response Frames

Response frames represent stdout and stderr output from the command as well as exit codes. Response frames encompass the full range of terminal emulator outputs, including the control characters necessary to render interactive applications.

# transferring stdout data
{"stdout": {"data": "...base64 encoded string of bytes ..."}}
 
# signaling that host closed stdout
{"stdout": {"close": true}}
{"exited":true,"result":{}}

The stdout data returned in the response frames from the job action endpoint is base64 encoded. This encoding is necessary to ensure that the data can be transmitted over WebSocket connections without issues, regardless of its content.

Sample Request and Response

This example response includes instances of the ANSI "control sequence introducer" (CSI), which is ASCII code 27 followed by [. The second stdout frame includes the desired output from the Action in question, which prints the local weather.

# Sample WebSocket request to execute an action
WebSocket Request: /v1/job/actions-demo/action?action=weather&allocID=8614ed07-425f-889f-170d-dd2716e0e01f&task=task&tty=true
 
# "\x1b[H\x1b[2J$ ":
# CSI-H (move cursor to top left corner), CSI-2J (clear entire screen), print "$ "
{"stdout":{"data":"G1tIG1sySiQg"}}
 
# Toronto: ⛅️  -1°C
{"stdout":{"data":"VG9yb250bzog4puF77iPICAtMcKwQw0K"}}

Create Job Version Tag

This endpoint creates a tag for a job version.

Applying a tag to a version prevents Nomad from garbage collecting that version. You can compare versions by tag name as well as version number.

Tag names must be unique per job.

Method	Path	Produces
`POST`	`/v1/job/:job_id/versions/:tag_name/tag`	`application/json`

Parameters

:job_id (string: <required>) - The ID of the job. Specify job_id as part of the path.
:tag_name (string: <required>) - The new tag name for the version specified in the payload. Must be unique per job. Specify tag_name as part of the path.
Version: (int: <optional>) - The job version number. If not specified, Nomad tags the latest version. Specify Version in the payload.
Description: (string: <optional>) - The tag description. Specify Description in the payload.

Sample Payload

{
  "Version": 0,
  "Description": "The version we can roll back to."
}

Sample Request

This example creates a tag named golden-version for version zero of the hello-world job.

$ curl -X POST \
 localhost:4646/v1/job/hello-world/versions/golden-version/tag \
 -H "Content-Type: application/json" -d \
 '{"Version": 0, "Description": "The version we can roll back to."}'

Sample Response

{
  "Name":"golden-version",
  "Description":"The version we can roll back to.",
  "TaggedTime":1728325495829793000,
  "Index":361,
  "LastContact":0,
  "KnownLeader":false,
  "NextToken":""}

Delete Job Version Tag

This endpoint deletes a job version tag.

Method	Path	Produces
`DELETE`	`/v1/job/:job_id/versions/:tag_name/tag`	`application/json`

Parameters

:job_id (string: <required>) - The ID of the job. Specify job_id as part of the path.
:tag_name (string: <required>) - The tag name. Specify tag_name as part of the path.

Sample Request

This example deletes the golden-version tag from the hello-world job.

$ curl -X DELETE localhost:4646/v1/job/hello-world/versions/golden-version/tag -H "Content-Type: application/json"

Sample Response

{
  "EvalID":"",
  "EvalCreateIndex":0,
  "JobModifyIndex":0,
  "VolumeEvalID":"",
  "VolumeEvalIndex":0,
  "Index":0,
  "LastContact":0,
  "KnownLeader":false,
  "NextToken":""
}