@Parallels
The Parallels plugin can be used with HashiCorp Packer to create custom images on Parallels.
- Partner
Updated 10 months ago
- GitHub(opens in new tab)
Parallels IPSW
Type: parallels-ipsw
Artifact BuilderId: packer.parallels
The Parallels Packer builder is able to create Parallels Desktop for Mac virtual machines and export them in the MACVM format, starting from an IPSW image. This IPSW builder is applicable for macOS VMs in Apple Silicon Chip systems only.
The builder builds a virtual machine by creating a new virtual machine from scratch, booting it, installing an OS, provisioning software within the OS, then shutting it down. The result of the Parallels builder is a directory containing all the files necessary to run the virtual machine portably.
Basic Example
Here is a basic example. This example is not functional. It will start the OS installer and then select the country. It is up to you to add the rest of the boot commands to actually install the OS. You can refer to packer examples.
source "parallels-ipsw" "macvm_automated" {
boot_command = ["<wait><enter><wait2s><enter><wait20s>", # Wait for boot
"<leftShiftOn><tab><leftShiftOff><spacebar><wait5s>", # Select country
]
boot_wait = "4m"
shutdown_command = "sudo shutdown -h now"
ipsw_url = "https://updates.cdn-apple.com/2023SpringFCS/fullrestores/042-01877/2F49A9FE-7033-41D0-9D0C-64EFCE6B4C22/UniversalMac_13.4.1_22F82_Restore.ipsw"
ipsw_checksum = "md5:acd17423a6de261121454513f0a2b814"
ssh_password = "parallels"
ssh_username = "parallels"
vm_name = "macOS"
cpus = "4"
memory = "8192"
disk_size = "50000"
}
build {
sources = ["source.parallels-ipsw.macvm_automated"]
provisioner "shell" {
inline = ["echo 'Running provisioner script'", "# Additional commands here"]
}
}
It is important to add a shutdown_command
. By default Packer halts the virtual
machine and the file system may not be sync'd. Thus, changes made in a
provisioner might not be saved.
Configuration Reference
There are many configuration options available for the Parallels builder. They are organized below into two categories: required and optional. Within each category, the available options are alphabetized and described.
In addition to the options listed here, a communicator can be configured for this builder. Setting communicator to "none" disables the communicator. The default communicator is "ssh".
IPSW Configuration Reference
By default, Packer will symlink, download or copy image files to the Packer
cache into a "hash($ipsw_url+$ipsw_checksum).ipsw
" file.
Packer uses hashicorp/go-getter in
file mode in order to perform a download.
go-getter supports the following protocols:
- Local files
- Git
- Mercurial
- HTTP
- Amazon S3
Examples:
go-getter can guess the checksum type based on ipsw_checksum
length, and it is
also possible to specify the checksum type.
In JSON:
"ipsw_checksum": "946a6077af6f5f95a51f82fdc44051c7aa19f9cfc5f737954845a6050543d7c2",
"ipsw_url": "apple.com/.../UniversalMac_13.5_22G74_Restore.ipsw"
"ipsw_checksum": "file:apple.com/.../UniversalMac_13.5_22G74_Restore.ipsw.sum",
"ipsw_url": "apple.com/.../UniversalMac_13.5_22G74_Restore.ipsw"
"ipsw_checksum": "file://./shasums.txt",
"ipsw_url": "apple.com/.../UniversalMac_13.5_22G74_Restore.ipsw"
"ipsw_checksum": "file:./shasums.txt",
"ipsw_url": "apple.com/.../UniversalMac_13.5_22G74_Restore.ipsw"
In HCL2:
ipsw_checksum = "946a6077af6f5f95a51f82fdc44051c7aa19f9cfc5f737954845a6050543d7c2"
ipsw_url = "apple.com/.../UniversalMac_13.5_22G74_Restore.ipsw"
ipsw_checksum = "file:apple.com/.../UniversalMac_13.5_22G74_Restore.ipsw.sum"
ipsw_url = "apple.com/.../UniversalMac_13.5_22G74_Restore.ipsw"
ipsw_checksum = "file://./shasums.txt"
ipsw_url = "apple.com/.../UniversalMac_13.5_22G74_Restore.ipsw"
ipsw_checksum = "file:./shasums.txt",
ipsw_url = "apple.com/.../UniversalMac_13.5_22G74_Restore.ipsw"
Required:
ipsw_checksum
(string) - The checksum for the IPSW file or virtual hard drive file. The type of the checksum is specified within the checksum field as a prefix, ex: "md5:{$checksum}". The type of the checksum can also be omitted and Packer will try to infer it based on string length. Valid values are "none", "{$checksum}", "md5:{$checksum}", "sha1:{$checksum}", "sha256:{$checksum}", "sha512:{$checksum}" or "file:{$path}". Here is a list of valid checksum values:- md5:090992ba9fd140077b0661cb75f7ce13
- 090992ba9fd140077b0661cb75f7ce13
- sha1:ebfb681885ddf1234c18094a45bbeafd91467911
- ebfb681885ddf1234c18094a45bbeafd91467911
- sha256:ed363350696a726b7932db864dda019bd2017365c9e299627830f06954643f93
- ed363350696a726b7932db864dda019bd2017365c9e299627830f06954643f93
- file:http://releases.ubuntu.com/20.04/SHA256SUMS
- file:file://./local/path/file.sum
- file:./local/path/file.sum
- none Although the checksum will not be verified when it is set to "none", this is not recommended since these files can be very large and corruption does happen from time to time.
ipsw_url
(string) - A URL to the IPSW containing the installation image or virtual hard drive (VHD or VHDX) file to clone.
Optional:
ipsw_urls
([]string) - Multiple URLs for the IPSW to download. Packer will try these in order. If anything goes wrong attempting to download or while downloading a single URL, it will move on to the next. All URLs must point to the same file (same checksum). By default this is empty andipsw_url
is used. Only one ofipsw_url
oripsw_urls
can be specified.ipsw_target_path
(string) - The path where the ipsw should be saved after download. By default will go in the packer cache, with a hash of the original filename and checksum as its name.
boot_command
(array of strings) - This is an array of commands to type when the virtual machine is first booted. The goal of these commands should be to type just enough to initialize the operating system installer. Special keys can be typed as well, and are covered in the section below on the boot command. If this is not specified, it is assumed the installer will start itself.boot_wait
(string) - The time to wait after booting the initial virtual machine before typing theboot_command
. The value of this should be a duration. Examples are "5s" and "1m30s" which will cause Packer to wait five seconds and one minute 30 seconds, respectively. If this isn't specified, the default is 10 seconds.cpus
(number) - The number of cpus to use for building the VM. Defaults to1
.disk_size
(number) - The size, in megabytes, of the hard disk to create for the VM. By default, this is 40000 (about 40 GB).host_interfaces
(array of strings) - A list of which interfaces on the host should be searched for a IP address. The first IP address found on one of these will be used as{{ .HTTPIP }}
in theboot_command
. Defaults to ["en0", "en1", "en2", "en3", "en4", "en5", "en6", "en7", "en8", "en9", "en10", "en11", "en12", "en13", "en14", "en15", "en16", "en17", "en18", "en19", "en20", "ppp0", "ppp1", "ppp2"].memory
(number) - The amount of memory to use for building the VM in megabytes. Defaults to512
megabytes.output_directory
(string) - This is the path to the directory where the resulting virtual machine will be created. This may be relative or absolute. If relative, the path is relative to the working directory whenpacker
is executed. This directory must not exist or be empty prior to running the builder. By default this is "output-BUILDNAME" where "BUILDNAME" is the name of the build.prlctl
(array of array of strings) - Customprlctl
commands to execute in order to further customize the virtual machine being created. The value of this is an array of commands to execute. The commands are executed in the order defined in the template. For each command, the command is defined itself as an array of strings, where each string represents a single argument on the command-line toprlctl
(but excludingprlctl
itself). Each arg is treated as a configuration template, where theName
variable is replaced with the VM name. More details on how to useprlctl
are below.prlctl_post
(array of array of strings) - Identical toprlctl
, except that it is run after the virtual machine is shutdown, and before the virtual machine is exported.prlctl_version_file
(string) - The path within the virtual machine to upload a file that contains theprlctl
version that was used to create the machine. This information can be useful for provisioning. By default this is ".prlctl_version", which will generally upload it into the home directory.shutdown_command
(string) - The command to use to gracefully shut down the machine once all the provisioning is done. By default this is an empty string, which tells Packer to just forcefully shut down the machine.sound
(boolean) - Specifies whether to enable the sound device when building the VM. Defaults tofalse
.shutdown_timeout
(string) - The amount of time to wait after executing theshutdown_command
for the virtual machine to actually shut down. If it doesn't shut down in this time, it is an error. By default, the timeout is "5m", or five minutes.usb
(boolean) - Specifies whether to enable the USB bus when building the VM. Defaults tofalse
.vm_name
(string) - This is the name of the PVM directory for the new virtual machine, without the file extension. By default this is "packer-BUILDNAME", where "BUILDNAME" is the name of the build.
Http directory configuration reference
Packer will create an http server serving http_directory
when it is set, a
random free port will be selected and the architecture of the directory
referenced will be available in your builder.
Example usage from a builder:
wget http://{{ .HTTPIP }}:{{ .HTTPPort }}/foo/bar/preseed.cfg
Optional:
http_directory
(string) - Path to a directory to serve using an HTTP server. The files in this directory will be available over HTTP that will be requestable from the virtual machine. This is useful for hosting kickstart files and so on. By default this is an empty string, which means no HTTP server will be started. The address and port of the HTTP server will be available as variables inboot_command
. This is covered in more detail below.http_content
(map[string]string) - Key/Values to serve using an HTTP server.http_content
works like and conflicts withhttp_directory
. The keys represent the paths and the values contents, the keys must start with a slash, ex:/path/to/file
.http_content
is useful for hosting kickstart files and so on. By default this is empty, which means no HTTP server will be started. The address and port of the HTTP server will be available as variables inboot_command
. This is covered in more detail below. Example:http_content = { "/a/b" = file("http/b") "/foo/bar" = templatefile("${path.root}/preseed.cfg", { packages = ["nginx"] }) }
http_port_min
(int) - These are the minimum and maximum port to use for the HTTP server started to serve thehttp_directory
. Because Packer often runs in parallel, Packer will choose a randomly available port in this range to run the HTTP server. If you want to force the HTTP server to be on one port, make this minimum and maximum port the same. By default the values are8000
and9000
, respectively.http_port_max
(int) - HTTP Port Maxhttp_bind_address
(string) - This is the bind address for the HTTP server. Defaults to 0.0.0.0 so that it will work with any network interface.
Boot Command
The boot_command
configuration is very important: it specifies the keys to
type when the virtual machine is first booted in order to start the OS
installer. This command is typed after boot_wait
, which gives the virtual
machine some time to actually load the restore image.
As documented above, the boot_command
is an array of strings. The strings are
all typed in sequence. It is an array only to improve readability within the
template.
The boot command is "typed" character for character (using the Parallels Virtualization SDK, see Parallels Builder in Parallels Desktop version 18 or before, or using the 'prlctl send-key-event from Parallels Desktop version 19') simulating a human actually typing the keyboard.
There are a set of special keys available. If these are in your boot command, they will be replaced by the proper key:
<bs>
- Backspace<del>
- Delete<enter> <return>
- Simulates an actual "enter" or "return" keypress.<esc>
- Simulates pressing the escape key.<tab>
- Simulates pressing the tab key.<f1> - <f12>
- Simulates pressing a function key.<up> <down> <left> <right>
- Simulates pressing an arrow key.<spacebar>
- Simulates pressing the spacebar.<insert>
- Simulates pressing the insert key.<home> <end>
- Simulates pressing the home and end keys.<pageUp> <pageDown>
- Simulates pressing the page up and page down keys.<menu>
- Simulates pressing the Menu key.<leftAlt> <rightAlt>
- Simulates pressing the alt key.<leftCtrl> <rightCtrl>
- Simulates pressing the ctrl key.<leftShift> <rightShift>
- Simulates pressing the shift key.<leftSuper> <rightSuper>
- Simulates pressing the ⌘ or Windows key.<wait> <wait5> <wait10>
- Adds a 1, 5 or 10 second pause before sending any additional keys. This is useful if you have to generally wait for the UI to update before typing more.<waitXX>
- Add an arbitrary pause before sending any additional keys. The format ofXX
is a sequence of positive decimal numbers, each with optional fraction and a unit suffix, such as300ms
,1.5h
or2h45m
. Valid time units arens
,us
(orµs
),ms
,s
,m
,h
. For example<wait10m>
or<wait1m20s>
On/Off variants
Any printable keyboard character, and of these "special" expressions, with the
exception of the <wait>
types, can also be toggled on or off. For example, to
simulate ctrl+c, use <leftCtrlOn>c<leftCtrlOff>
. Be sure to release them,
otherwise they will be held down until the machine reboots.
To hold the c
key down, you would use <cOn>
. Likewise, <cOff>
to release.
Templates inside boot command
In addition to the special keys, each command to type is treated as a template engine. The available variables are:
HTTPIP
andHTTPPort
- The IP and port, respectively of an HTTP server that is started serving the directory specified by thehttp_directory
configuration parameter or the content specified in thehttp_content
map. Ifhttp_directory
orhttp_content
isn't specified, these will be blank!Name
- The name of the VM.
For more examples of various boot commands, see the sample projects from our community templates page.
For more examples of various boot commands, see the sample projects from our community templates page.
prlctl Commands
In order to perform extra customization of the virtual machine, a template can
define extra calls to prlctl
to perform.
prlctl
is the command-line interface to Parallels Desktop. It can be used to configure
the advanced virtual machine options.
Extra prlctl
commands are defined in the template in the prlctl
section. In the
example below prlctl
is used to explicitly enable the adaptive hypervisor, and
disable 3d acceleration:
{
"prlctl": [
["set", "{{.Name}}", "--3d-accelerate", "off"],
["set", "{{.Name}}", "--adaptive-hypervisor", "on"]
]
}
The value of prlctl
is an array of commands to execute. These commands are
executed in the order defined. So in the above example, 3d acceleration will be disabled
first, followed by the command which enables the adaptive hypervisor.
Each command itself is an array of strings, where each string is an argument to
prlctl
. Each argument is treated as a template engine. The only available
variable is Name
which is replaced with the unique name of the VM, which is
required for many prlctl
calls.