Upgrade Consul version on RedHat OpenShift clusters

This page describes process and considerations to upgrade the version of Consul deployments running on OpenShift clusters. When Consul runs on OpenShift clusters, there are two packages to update: a Helm chart located in Docker Hub and a Consul container from the Red Hat Ecosystem Catalog. That means that you may need to update the container image and the Helm chart version.

Upgrade types

We recommend updating Consul on RedHat OpenShift when:

You change your Helm configuration
A new Helm chart is released
You want to upgrade your Consul version

The upgrade procedure you use depends on the type of upgrade you are performing.

Determine scope of changes

Before upgrading, it is important to understand the changes that affect your cluster.

There is no built-in functionality in Helm that shows what a Helm upgrade changes, but Helm plugin helm-diff is available.

Install helm-diff.

$ helm plugin install https://github.com/databus23/helm-diff

Update your local Helm repository cache:
```
$ helm repo update
```

Determine your current installed chart version.

$ helm list --filter consul --namespace consul
NAME    NAMESPACE   REVISION    UPDATED                                 STATUS      CHART           APP VERSION
consul  consul      1           2025-04-22 14:39:13.599498 +0200 CEST   deployed    consul-1.4.0    1.18.0

In this example, the current Helm chart version is 1.4.0. It runs with Consul version 1.18.0, and is installed in the OpenShift clusters' consul namespace.

List the available versions of the chart.

$ helm search repo hashicorp/consul --versions
hashicorp/consul    1.4.9           1.18.2      Official HashiCorp Consul Chart
hashicorp/consul    1.4.8           1.18.2      Official HashiCorp Consul Chart
hashicorp/consul    1.4.7           1.18.2      Official HashiCorp Consul Chart
hashicorp/consul    1.4.6           1.18.2      Official HashiCorp Consul Chart
hashicorp/consul    1.4.5           1.18.2      Official HashiCorp Consul Chart
hashicorp/consul    1.4.4           1.18.2      Official HashiCorp Consul Chart
hashicorp/consul    1.4.3           1.18.2      Official HashiCorp Consul Chart
hashicorp/consul    1.4.2           1.18.2      Official HashiCorp Consul Chart
hashicorp/consul    1.4.1           1.18.1      Official HashiCorp Consul Chart
hashicorp/consul    1.4.0           1.18.0      Official HashiCorp Consul Chart
...

Different Consul versions have different Helm chart requirements.

Pick a version to update to, and check the following update-related resources:
1. Changelog for any breaking changes between the current version and the target version: CHANGELOG.md
2. Read any specific instructions for the version you want to upgrade to.
3. Read our Compatibility Matrix to ensure your current Helm chart version supports this Consul version. If it does not, you may need to also upgrade your Helm chart version at the same time.
In this example, we select chart version 1.4.9 and Consul version 1.18.2. The chart version 1.4.9 is compatible with Consul version 1.18.2, so we can proceed with the upgrade.
Edit the global.image stanza to image: registry.connect.redhat.com/hashicorp/consul:1.18.2-ubi.
values.yaml
```
global:
  image: "registry.connect.redhat.com/hashicorp/consul:1.18.2-ubi"
```

Run helm diff upgrade with your updated values.yaml file and your selected Helm chart version, which is 1.4.9 in this case.

$ helm diff upgrade consul hashicorp/consul --namespace consul --version 1.4.9 --values /path/to/your/values.yaml
default, consul-server, StatefulSet (apps) has changed:
# Source: consul/templates/server-statefulset.yaml
# StatefulSet to run the actual Consul server cluster.
apiVersion: apps/v1
kind: StatefulSet
...
        containers:
        - name: consul

                image: "registry.connect.redhat.com/hashicorp/consul:1.18.0-ubi"

                image: "registry.connect.redhat.com/hashicorp/consul:1.18.2-ubi"
 
      ...

 
This command prints out the manifests that will be updated and their diffs.
 
 To return only updated objects, add `| grep "has changed"`.
 
```shell-session
$ helm diff upgrade consul hashicorp/consul --namespace consul --version 1.4.9 --values /path/to/your/values.yaml | grep "has changed"
default, consul-server, StatefulSet (apps) has changed:

If consul-server, StatefulSet appears, it means your Consul server StatefulSet will be redeployed when you apply the updated Helm values.
A StatefulSet runs a group of Pods, and maintains an specific identity for each of those Pods. This is useful for managing applications that need persistent storage, like Consul servers. Upgrading the StatefulSet all at once will cause downtime. Therefore, if your StatefulSet needs to be redeployed, follow the Rolling upgrade for zero downtime for redeploying servers one by one. If you see consul-client, StatefulSet has changed, it means your Consul clients StatefulSet will be redeployed when you apply the updated Helm values. Unlike for the Consul servers, this action does not equal downtime because the Consul client is stateless and can be redeployed all at once.

Upgrade Consul and Helm chart

Upgrade by performing a helm upgrade with the --version flag set to the chart version you want to upgrade to, which is 1.4.9 in this case.

$ helm upgrade consul hashicorp/consul --namespace consul --version "1.4.9" --values /path/to/my/values.yaml
Release "consul" has been upgraded. Happy Helming!
NAME: consul
LAST DEPLOYED: Tue Apr 22 18:24:14 2025
NAMESPACE: consul
STATUS: deployed
REVISION: 6
NOTES:
Thank you for installing HashiCorp Consul!

Your release is named consul.

To learn more about the release, run:

  $ helm status consul --namespace default
  $ helm get all consul --namespace default

Consul on Kubernetes Documentation:
https://www.consul.io/docs/platform/k8s

Consul on Kubernetes CLI Reference:
https://www.consul.io/docs/k8s/k8s-cli

If you do not pass the --version flag when upgrading a Helm chart, Helm uses the most recent version of the chart in its local cache, which may result in an upgrade to an unintended version.

Rolling upgrade for zero downtime

If you are upgrading a Consul server cluster in K8s, you can perform a rolling upgrade to ensure that your Consul cluster is always available. This is done by setting the updatePartition value in your Helm chart configuration. The updatePartition value controls how many instances of the server cluster are updated. Only instances with an index greater than the updatePartition value are updated (zero-indexed). Therefore, by setting it equal to replicas, updates to the server pods should not occur immediately. The updatePartition value is set in the server section of your Helm chart configuration. The default value is 0, which means that all instances of the server cluster will be updated at once.

To perform a rolling upgrade, follow these steps:

Change the global.image value to the desired Consul version. Suppose we are running version v1.19.1 and upgrading to v1.20.0. We will use Helm chart version 1.6.0 for this example.

Set the server.updatePartition value to the number of server replicas. By default, there are 3 servers, so you would set this value to 3.

global:
  ...
  image: 'registry.connect.redhat.com/hashicorp/consul:1.20.0-ubi'
  ...
server:
  replicas: 3
  updatePartition: 3

Next, perform the initial step of the upgrade:
```
$ helm upgrade consul hashicorp/consul --namespace consul --version 1.6.0 --values /path/to/your/values.yaml
```
With the updatePartition setting to three, this command does not cause the servers to redeploy, although the resource is updated.
If everything is stable, decrease the updatePartition value by one and perform helm upgrade again. This will cause the first Consul server to be stopped and restarted with the new image.
Wait until the Consul server cluster is healthy again (30s to a few minutes). This can be confirmed by issuing consul members on one of the previous servers, and ensuring that all servers are listed and are alive. For example, to run the command on the third server, run kubectl exec -it -n consul consul-server-2 -- consul members
Decrease updatePartition by one and upgrade again. Continue until updatePartition is 0. At this point, you may remove the updatePartition configuration. Your server upgrade is complete.

Upgrading to Consul Dataplane

In earlier versions, Consul on Kubernetes used client agents in its deployments. As of v1.14.0, Consul uses Consul Dataplane in Kubernetes deployments instead of client agents.

If you upgrade Consul from a version lower than v1.14.0 to version v1.14.0 or higher, complete the following steps to upgrade your deployment safely and without downtime.

If ACLs are enabled, you must first upgrade to consul-k8s 0.49.8. These versions expose the setting connectInject.prepareDataplanesUpgrade which is required for no-downtime upgrades when ACLs are enabled.
Set connectInject.prepareDataplanesUpgrade to true and then perform the upgrade to 0.49.8.
```
connectInject:
  prepareDataplanesUpgrade: true
```
Consul dataplanes disables Consul clients by default, but during an upgrade you need to ensure Consul clients continue to run. Edit your Helm chart configuration and set the client.enabled field to true and specify an action for Consul to take during the upgrade process in the client.updateStrategy field:
```
client:
  enabled: true
  updateStrategy: |
    type: OnDelete
```
Follow our recommended procedures to upgrade servers on Kubernetes deployments to upgrade Helm values for the new version of Consul. The latest version of consul-k8s components may be in a CrashLoopBackoff state during the performance of the server upgrade from versions older than 1.14.x until all Consul servers are on versions higher or equal to 1.14.x. Components in CrashLoopBackoff will not negatively affect the cluster because older versioned components will still be operating. Once all servers have been fully upgraded, the latest consul-k8s components will automatically restore from CrashLoopBackoff and older component versions will be spun down.
Run kubectl rollout restart to restart your service mesh applications. Restarting service mesh application causes Kubernetes to re-inject them with the webhook for dataplanes.
Restart all gateways in your service mesh.
Now that all services and gateways are using Consul dataplanes, disable client agents in your Helm chart by deleting the client stanza or setting client.enabled to false and running a consul-k8s or Helm upgrade.
If ACLs are enabled, outdated ACL tokens will persist a result of the upgrade. You can manually delete the tokens to declutter your Consul environment.
Outdated connect-injector tokens have the following description: token created via login: {"component":"connect-injector"}. Do not delete the tokens that have a description where pod is a key, for example token created via login: {"component":"connect-injector","pod":"default/consul-connect-injector-576b65747c-9547x"}). The dataplane-enabled connect inject pods use these tokens.
You can also review the creation date for the tokens and only delete the injector tokens created before your upgrade, but do not delete all old tokens without considering if they are still in use. Some tokens, such as the server tokens, are still necessary.