Helm Chart Reference

The chart is highly customizable using Helm configuration values. Each value has a reasonable default tuned for an optimal getting started experience with Consul.

Top-Level Stanzas

Use these links to navigate to a particular top-level stanza.

• global
• server
• externalServers
• client
• dns
• ui
• syncCatalog
• connectInject
• meshGateway
• ingressGateways
• terminatingGateways
• apiGateway
• webhookCertManager
• prometheus
• tests
• telemetryCollector

All Values

global

• global - Holds values that affect multiple components of the chart.

  • enabled (boolean: true) - The main enabled/disabled setting. If true, servers, clients, Consul DNS and the Consul UI will be enabled. Each component can override this default via its component-specific "enabled" config. If false, no components will be installed by default and per-component opt-in is required, such as by setting server.enabled to true.

  • logLevel (string: info) - The default log level to apply to all components which do not otherwise override this setting. It is recommended to generally not set this below "info" unless actively debugging due to logging verbosity. One of "debug", "info", "warn", or "error".

  • logJSON (boolean: false) - Enable all component logs to be output in JSON format.

  • name (string: null) - Set the prefix used for all resources in the Helm chart. If not set, the prefix will be <helm release name>-consul.

  • domain (string: consul) - The domain Consul will answer DNS queries for (Refer to -domain) and the domain services synced from Consul into Kubernetes will have, e.g. service-name.service.consul.

  • peering - Configures the Cluster Peering feature. Requires Consul v1.14+ and Consul-K8s v1.0.0+.

    • enabled (boolean: false) - If true, the Helm chart enables Cluster Peering for the cluster. This option enables peering controllers and allows use of the PeeringAcceptor and PeeringDialer CRDs for establishing service mesh peerings.

  • adminPartitions - EnterpriseEnterprise Enabling adminPartitions allows creation of Admin Partitions in Kubernetes clusters. It additionally indicates that you are running Consul Enterprise v1.11+ with a valid Consul Enterprise license. Admin partitions enables deploying services across partitions, while sharing a set of Consul servers.

    • enabled (boolean: false) - If true, the Helm chart will enable Admin Partitions for the cluster. The clients in the server cluster must be installed in the default partition. Creation of Admin Partitions is only supported during installation. Admin Partitions cannot be installed via a Helm upgrade operation. Only Helm installs are supported.

    • name (string: default) - The name of the Admin Partition. The partition name cannot be modified once the partition has been installed. Changing the partition name would require an un-install and a re-install with the updated name. Must be "default" in the server cluster ie the Kubernetes cluster that the Consul server pods are deployed onto.

  • image (string: hashicorp/consul:<latest version>) - The name (and tag) of the Consul Docker image for clients and servers. This can be overridden per component. This should be pinned to a specific version tag, otherwise you may inadvertently upgrade your Consul version.

    Examples:

    # Consul 1.10.0
    image: "consul:1.10.0"
    # Consul Enterprise 1.10.0
    image: "hashicorp/consul-enterprise:1.10.0-ent"
    

  • imagePullSecrets (array<map>) - Array of objects containing image pull secret names that will be applied to each service account. This can be used to reference image pull secrets if using a custom consul or consul-k8s-control-plane Docker image. Refer to https://kubernetes.io/docs/concepts/containers/images/#using-a-private-registry.

    Example:

    imagePullSecrets:
      - name: pull-secret-name
      - name: pull-secret-name-2
    

  • imageK8S (string: hashicorp/consul-k8s-control-plane:<latest version>) - The name (and tag) of the consul-k8s-control-plane Docker image that is used for functionality such as catalog sync. This can be overridden per component.

  • datacenter (string: dc1) - The name of the datacenter that the agents should register as. This can't be changed once the Consul cluster is up and running since Consul doesn't support an automatic way to change this value currently: https://github.com/hashicorp/consul/issues/1858.

  • enablePodSecurityPolicies (boolean: false) - Controls whether pod security policies are created for the Consul components created by this chart. Refer to https://kubernetes.io/docs/concepts/policy/pod-security-policy/.

  • secretsBackend - secretsBackend is used to configure Vault as the secrets backend for the Consul on Kubernetes installation. The Vault cluster needs to have the Kubernetes Auth Method, KV2 and PKI secrets engines enabled and have necessary secrets, policies and roles created prior to installing Consul. Refer to Vault as the Secrets Backend documentation for full instructions.

    The Vault cluster must not have the Consul cluster installed by this Helm chart as its storage backend as that would cause a circular dependency. Vault can have Consul as its storage backend as long as that Consul cluster is not running on this Kubernetes cluster and is being managed separately from this Helm installation.

    Note: When using Vault KV2 secrets engines the "data" field is implicitly required for Vault API calls, secretName should be in the form of "vault-kv2-mount-path/data/secret-name". secretKey should be in the form of "key".

    • vault

      • vaultNamespace (string: "") - Vault namespace (optional). This sets the Vault namespace for the vault.hashicorp.com/namespace agent annotation and Vault Connect CA namespace. To override one of these values individually, see agentAnnotations and connectCA.additionalConfig.

      • enabled (boolean: false) - Enabling the Vault secrets backend will replace Kubernetes secrets with referenced Vault secrets.

      • consulServerRole (string: "") - The Vault role for the Consul server. The role must be connected to the Consul server's service account. The role must also have a policy with read capabilities for the following secrets:

        • gossip encryption key defined by the global.gossipEncryption.secretName value
        • certificate issue path defined by the server.serverCert.secretName value
        • CA certificate defined by the global.tls.caCert.secretName value
        • replication token defined by the global.acls.replicationToken.secretName value if global.federation.enabled is true To discover the service account name of the Consul server, run
        $ helm template --show-only templates/server-serviceaccount.yaml <release-name> hashicorp/consul
        

        and check the name of metadata.name.

      • consulClientRole (string: "") - The Vault role for the Consul client. The role must be connected to the Consul client's service account. The role must also have a policy with read capabilities for the gossip encryption key defined by the global.gossipEncryption.secretName value. To discover the service account name of the Consul client, run

        $ helm template --show-only templates/client-serviceaccount.yaml <release-name> hashicorp/consul
        

        and check the name of metadata.name.

      • manageSystemACLsRole (string: "") - A Vault role for the Consul server-acl-init job, which manages setting ACLs so that clients and components can obtain ACL tokens. The role must be connected to the server-acl-init job's service account. The role must also have a policy with read and write capabilities for the bootstrap, replication or partition tokens To discover the service account name of the server-acl-init job, run

        $ helm template --show-only templates/server-acl-init-serviceaccount.yaml \
          --set global.acls.manageSystemACLs=true <release-name> hashicorp/consul
        

        and check the name of metadata.name.

      • adminPartitionsRole (string: "") - EnterpriseEnterprise A Vault role that allows the Consul partition-init job to read a Vault secret for the partition ACL token. The partition-init job bootstraps Admin Partitions on Consul servers. . This role must be bound the partition-init job's service account. To discover the service account name of the partition-init job, run with Helm values for the client cluster:

        $ helm template --show-only templates/partition-init-serviceaccount.yaml -f client-cluster-values.yaml <release-name> hashicorp/consul
        

        and check the name of metadata.name.

      • connectInjectRole (string: "") - The Vault role to read Consul connect-injector webhook's CA and issue a certificate and private key. A Vault policy must be created which grants issue capabilities to global.secretsBackend.vault.connectInject.tlsCert.secretName.

      • consulCARole (string: "") - The Vault role for all Consul components to read the Consul's server's CA Certificate (unauthenticated). The role should be connected to the service accounts of all Consul components, or alternatively * since it will be used only against the pki/cert/ca endpoint which is unauthenticated. A policy must be created which grants read capabilities to global.tls.caCert.secretName, which is usually pki/cert/ca.

      • agentAnnotations (string: null) - This value defines additional annotations for Vault agent on any pods where it'll be running. This should be formatted as a multi-line string.

        annotations: |
          "sample/annotation1": "foo"
          "sample/annotation2": "bar"
        

      • ca - Configuration for Vault server CA certificate. This certificate will be mounted to any pod where Vault agent needs to run.

        • secretName (string: "") - The name of the Kubernetes or Vault secret that holds the Vault CA certificate. A Kubernetes secret must be in the same namespace that Consul is installed into.

        • secretKey (string: "") - The key within the Kubernetes or Vault secret that holds the Vault CA certificate.

      • connectCA - Configuration for the Vault Connect CA provider. The provider will be configured to use the Vault Kubernetes auth method and therefore requires the role provided by global.secretsBackend.vault.consulServerRole to have permissions to the root and intermediate PKI paths. Please refer to Vault ACL policies documentation for information on how to configure the Vault policies.

        • address (string: "") - The address of the Vault server.

        • authMethodPath (string: kubernetes) - The mount path of the Kubernetes auth method in Vault.

        • rootPKIPath (string: "") - The path to a PKI secrets engine for the root certificate. For more details, please refer to Vault Connect CA configuration.

        • intermediatePKIPath (string: "") - The path to a PKI secrets engine for the generated intermediate certificate. For more details, please refer to Vault Connect CA configuration.

        • additionalConfig (string: {}) - Additional Connect CA configuration in JSON format. Please refer to Vault Connect CA configuration for all configuration options available for that provider.

          Example:

          additionalConfig: |
            {
              "connect": [{
                "ca_config": [{
                     "leaf_cert_ttl": "36h"
                  }]
              }]
            }
          

      • connectInject

        • caCert - Configuration to the Vault Secret that Kubernetes uses on Kubernetes pod creation, deletion, and update, to get CA certificates used issued from vault to send webhooks to the ConnectInject.

          • secretName (string: null) - The Vault secret path that contains the CA certificate for Connect Inject webhooks.

        • tlsCert - Configuration to the Vault Secret that Kubernetes uses on Kubernetes pod creation, deletion, and update, to get TLS certificates used issued from vault to send webhooks to the ConnectInject.

          • secretName (string: null) - The Vault secret path that issues TLS certificates for connect inject webhooks.

  • gossipEncryption - Configures Consul's gossip encryption key. (Refer to -encrypt). By default, gossip encryption is not enabled. The gossip encryption key may be set automatically or manually. The recommended method is to automatically generate the key. To automatically generate and set a gossip encryption key, set autoGenerate to true. Values for secretName and secretKey should not be set if autoGenerate is true. To manually generate a gossip encryption key, set secretName and secretKey and use Consul to generate a key, saving this as a Kubernetes secret or Vault secret path and key. If global.secretsBackend.vault.enabled=true, be sure to add the "data" component of the secretName path as required by the Vault KV-2 secrets engine [refer to example].

    $ kubectl create secret generic consul-gossip-encryption-key --from-literal=key=$(consul keygen)
    

    Vault CLI Example:

    $ vault kv put consul/secrets/gossip key=$(consul keygen)
    

    gossipEncryption.secretName="consul/data/secrets/gossip" gossipEncryption.secretKey="key"

    • autoGenerate (boolean: false) - Automatically generate a gossip encryption key and save it to a Kubernetes or Vault secret.

    • secretName (string: "") - The name of the Kubernetes secret or Vault secret path that holds the gossip encryption key. A Kubernetes secret must be in the same namespace that Consul is installed into.

    • secretKey (string: "") - The key within the Kubernetes secret or Vault secret key that holds the gossip encryption key.

    • logLevel (string: "") - Override global log verbosity level for gossip-encryption-autogenerate-job pods. One of "trace", "debug", "info", "warn", or "error".

  • recursors (array<string>: []) - A list of addresses of upstream DNS servers that are used to recursively resolve DNS queries. These values are given as -recursor flags to Consul servers and clients. Refer to -recursor for more details. If this is an empty array (the default), then Consul DNS will only resolve queries for the Consul top level domain (by default .consul).

  • tls - Enables TLS across the cluster to verify authenticity of the Consul servers and clients. Requires Consul v1.4.1+.

    • enabled (boolean: false) - If true, the Helm chart will enable TLS for Consul servers and clients and all consul-k8s-control-plane components, as well as generate certificate authority (optional) and server and client certificates. This setting is required for Cluster Peering.

    • logLevel (string: "") - Override global log verbosity level. One of "trace", "debug", "info", "warn", or "error".

    • enableAutoEncrypt (boolean: false) - If true, turns on the auto-encrypt feature on clients and servers. It also switches consul-k8s-control-plane components to retrieve the CA from the servers via the API. Requires Consul 1.7.1+.

    • serverAdditionalDNSSANs (array<string>: []) - A list of additional DNS names to set as Subject Alternative Names (SANs) in the server certificate. This is useful when you need to access the Consul server(s) externally, for example, if you're using the UI.

    • serverAdditionalIPSANs (array<string>: []) - A list of additional IP addresses to set as Subject Alternative Names (SANs) in the server certificate. This is useful when you need to access the Consul server(s) externally, for example, if you're using the UI.

    • verify (boolean: true) - If true, verify_outgoing, verify_server_hostname, and verify_incoming for internal RPC communication will be set to true for Consul servers and clients. Set this to false to incrementally roll out TLS on an existing Consul cluster. Please refer to TLS on existing clusters for more details.

    • httpsOnly (boolean: true) - If true, the Helm chart will configure Consul to disable the HTTP port on both clients and servers and to only accept HTTPS connections.

    • caCert - A secret containing the certificate of the CA to use for TLS communication within the Consul cluster. If you have generated the CA yourself with the consul CLI, you could use the following command to create the secret in Kubernetes:

      $ kubectl create secret generic consul-ca-cert \
          --from-file='tls.crt=./consul-agent-ca.pem'
      

      If you are using Vault as a secrets backend with TLS, caCert.secretName must be provided and should reference the CA path for your PKI secrets engine. This should be of the form pki/cert/ca where pki is the mount point of your PKI secrets engine. A read policy must be created and associated with the CA cert path for global.tls.caCert.secretName. This will be consumed by the global.secretsBackend.vault.consulCARole role by all Consul components. When using Vault the secretKey is not used.

      • secretName (string: null) - The name of the Kubernetes or Vault secret that holds the CA certificate.

      • secretKey (string: null) - The key within the Kubernetes or Vault secret that holds the CA certificate.

    • caKey - A Kubernetes or Vault secret containing the private key of the CA to use for TLS communication within the Consul cluster. If you have generated the CA yourself with the consul CLI, you could use the following command to create the secret in Kubernetes:

      $ kubectl create secret generic consul-ca-key \
          --from-file='tls.key=./consul-agent-ca-key.pem'
      

      Note that we need the CA key so that we can generate server and client certificates. It is particularly important for the client certificates since they need to have host IPs as Subject Alternative Names. If you are setting server certs yourself via server.serverCert and you are not enabling clients (or clients are enabled with autoEncrypt) then you do not need to provide the CA key.

      • secretName (string: null) - The name of the Kubernetes or Vault secret that holds the CA key.

      • secretKey (string: null) - The key within the Kubernetes or Vault secret that holds the CA key.

    • annotations (string: null) - This value defines additional annotations for tls init jobs. Format this value as a multi-line string.

      annotations: |
        "sample/annotation1": "foo"
        "sample/annotation2": "bar"
      

  • enableConsulNamespaces (boolean: false) - EnterpriseEnterprise enableConsulNamespaces indicates that you are running Consul Enterprise v1.7+ with a valid Consul Enterprise license and would like to make use of configuration beyond registering everything into the default Consul namespace. Additional configuration options are found in the consulNamespaces section of both the catalog sync and connect injector.

  • acls - Configure ACLs.

    • manageSystemACLs (boolean: false) - If true, the Helm chart will automatically manage ACL tokens and policies for all Consul and consul-k8s-control-plane components. This requires Consul >= 1.4.

    • logLevel (string: "") - Override global log verbosity level. One of "trace", "debug", "info", "warn", or "error".

    • bootstrapToken - A Kubernetes or Vault secret containing the bootstrap token to use for creating policies and tokens for all Consul and consul-k8s-control-plane components. If secretName and secretKey are unset, a default secret name and secret key are used. If the secret is populated, then we will skip ACL bootstrapping of the servers and will only initialize ACLs for the Consul clients and consul-k8s-control-plane system components. If the secret is empty, then we will bootstrap ACLs on the Consul servers, and write the bootstrap token to this secret. If ACLs are already bootstrapped on the servers, then the secret must contain the bootstrap token.

      • secretName (string: null) - The name of the Kubernetes or Vault secret that holds the bootstrap token. If unset, this defaults to {{ global.name }}-bootstrap-acl-token.

      • secretKey (string: null) - The key within the Kubernetes or Vault secret that holds the bootstrap token. If unset, this defaults to token.

    • createReplicationToken (boolean: false) - If true, an ACL token will be created that can be used in secondary datacenters for replication. This should only be set to true in the primary datacenter since the replication token must be created from that datacenter. In secondary datacenters, the secret needs to be imported from the primary datacenter and referenced via global.acls.replicationToken.

    • replicationToken - replicationToken references a secret containing the replication ACL token. This token will be used by secondary datacenters to perform ACL replication and create ACL tokens and policies. This value is ignored if bootstrapToken is also set.

      • secretName (string: null) - The name of the Kubernetes or Vault secret that holds the replication token.

      • secretKey (string: null) - The key within the Kubernetes or Vault secret that holds the replication token.

    • resources (map) - The resource requests (CPU, memory, etc.) for the server-acl-init and server-acl-init-cleanup pods. This should be a YAML map corresponding to a Kubernetes `ResourceRequirements`` object.

      Example:

      resources:
        requests:
          memory: '200Mi'
          cpu: '100m'
        limits:
          memory: '200Mi'
          cpu: '100m'
      

    • partitionToken - partitionToken references a Vault secret containing the ACL token to be used in non-default partitions. This value should only be provided in the default partition and only when setting the global.secretsBackend.vault.enabled value to true. Consul will use the value of the secret stored in Vault to create an ACL token in Consul with the value of the secret as the secretID for the token. In non-default, partitions set this secret as the bootstrapToken.

      • secretName (string: null) - The name of the Vault secret that holds the partition token.

      • secretKey (string: null) - The key within the Vault secret that holds the parition token.

    • tolerations (string: "") - tolerations configures the taints and tolerations for the server-acl-init and server-acl-init-cleanup jobs. This should be a multi-line string matching the Tolerations array in a Pod spec.

    • nodeSelector (string: null) - This value defines nodeSelector labels for the server-acl-init and server-acl-init-cleanup jobs pod assignment, formatted as a multi-line string.

      Example:

      nodeSelector: |
        beta.kubernetes.io/arch: amd64
      

    • annotations (string: null) - This value defines additional annotations for acl init jobs. Format this value as a multi-line string.

      annotations: |
        "sample/annotation1": "foo"
        "sample/annotation2": "bar"
      

  • argocd - If argocd.enabled is set to true, following annotations are added to job - server-acl-init-job annotations - argocd.argoproj.io/hook: Sync argocd.argoproj.io/hook-delete-policy: HookSucceeded

    • enabled (boolean: false)

  • enterpriseLicense - EnterpriseEnterprise This value refers to a Kubernetes or Vault secret that you have created that contains your enterprise license. It is required if you are using an enterprise binary. Defining it here applies it to your cluster once a leader has been elected. If you are not using an enterprise image or if you plan to introduce the license key via another route, then set these fields to null. Note: the job to apply license runs on both Helm installs and upgrades.

    • secretName (string: null) - The name of the Kubernetes or Vault secret that holds the enterprise license. A Kubernetes secret must be in the same namespace that Consul is installed into.

    • secretKey (string: null) - The key within the Kubernetes or Vault secret that holds the enterprise license.

    • enableLicenseAutoload (boolean: true) - Manages license autoload. Required in Consul 1.10.0+, 1.9.7+ and 1.8.12+.

  • federation - Configure federation.

    • enabled (boolean: false) - If enabled, this datacenter will be federation-capable. Only federation via mesh gateways is supported. Mesh gateways and servers will be configured to allow federation. Requires global.tls.enabled, connectInject.enabled, and one of meshGateway.enabled or externalServers.enabled to be true. Requires Consul 1.8+.

    • createFederationSecret (boolean: false) - If true, the chart will create a Kubernetes secret that can be imported into secondary datacenters so they can federate with this datacenter. The secret contains all the information secondary datacenters need to contact and authenticate with this datacenter. This should only be set to true in your primary datacenter. The secret name is <global.name>-federation (if setting global.name), otherwise <helm-release-name>-consul-federation.

    • primaryDatacenter (string: null) - The name of the primary datacenter.

    • primaryGateways (array<string>: []) - A list of addresses of the primary mesh gateways in the form <ip>:<port> (e.g. ["1.1.1.1:443", "2.3.4.5:443"]).

    • k8sAuthMethodHost (string: null) - If you are setting global.federation.enabled to true and are in a secondary datacenter, set k8sAuthMethodHost to the address of the Kubernetes API server of the secondary datacenter. This address must be reachable from the Consul servers in the primary datacenter. This auth method will be used to provision ACL tokens for Consul components and is different from the one used by the Consul Service Mesh. Please refer to the Kubernetes Auth Method documentation.

      If externalServers.enabled is set to true, global.federation.k8sAuthMethodHost and externalServers.k8sAuthMethodHost should be set to the same value.

      You can retrieve this value from your kubeconfig by running:

      $ kubectl config view \
        -o jsonpath="{.clusters[?(@.name=='<your cluster name>')].cluster.server}"
      

    • logLevel (string: "") - Override global log verbosity level for the create-federation-secret-job pods. One of "trace", "debug", "info", "warn", or "error".

  • metrics - Configures metrics for Consul service mesh

    • enabled (boolean: false) - Configures the Helm chart’s components to expose Prometheus metrics for the Consul service mesh. By default this includes gateway metrics and sidecar metrics.

    • enableAgentMetrics (boolean: false) - Configures consul agent metrics. Only applicable if global.metrics.enabled is true.

    • agentMetricsRetentionTime (string: 1m) - Configures the retention time for metrics in Consul clients and servers. This must be greater than 0 for Consul clients and servers to expose any metrics at all. Only applicable if global.metrics.enabled is true.

    • enableGatewayMetrics (boolean: true) - If true, mesh, terminating, and ingress gateways will expose their Envoy metrics on port 20200 at the /metrics path and all gateway pods will have Prometheus scrape annotations. Only applicable if global.metrics.enabled is true.

    • enableTelemetryCollector (boolean: false) - Configures the Helm chart’s components to forward envoy metrics for the Consul service mesh to the consul-telemetry-collector. This includes gateway metrics and sidecar metrics.

  • imageConsulDataplane (string: hashicorp/consul-dataplane:<latest supported version>) - The name (and tag) of the consul-dataplane Docker image used for the connect-injected sidecar proxies and mesh, terminating, and ingress gateways.

  • openshift - Configuration for running this Helm chart on the Red Hat OpenShift platform. This Helm chart currently supports OpenShift v4.x+.

    • enabled (boolean: false) - If true, the Helm chart will create necessary configuration for running its components on OpenShift.

  • consulAPITimeout (string: 5s) - The time in seconds that the consul API client will wait for a response from the API before cancelling the request.

  • cloud - Enables installing an HCP Consul Central self-managed cluster. Requires Consul v1.14+.

    • enabled (boolean: false) - If true, the Helm chart will link a self-managed cluster to HCP. This can either be used to configure a new cluster or link an existing one.

      Note: this setting should not be enabled for HashiCorp-managed clusters. It is strictly for linking self-managed clusters.

    • resourceId - The resource id of the HCP Consul Central cluster to link to. Eg: organization/27109cd4-a309-4bf3-9986-e1d071914b18/project/fcef6c24-259d-4510-bb8d-1d812e120e34/hashicorp.consul.global-network-manager.cluster/consul-cluster This is required when global.cloud.enabled is true.

      • secretName (string: null) - The name of the Kubernetes secret that holds the resource id.

      • secretKey (string: null) - The key within the Kubernetes secret that holds the resource id.

    • clientId - The client id portion of a service principal with authorization to link the cluster in global.cloud.resourceId to HCP Consul Central. This is required when global.cloud.enabled is true.

      • secretName (string: null) - The name of the Kubernetes secret that holds the client id.

      • secretKey (string: null) - The key within the Kubernetes secret that holds the client id.

    • clientSecret - The client secret portion of a service principal with authorization to link the cluster in global.cloud.resourceId to HCP Consul Central. This is required when global.cloud.enabled is true.

      • secretName (string: null) - The name of the Kubernetes secret that holds the client secret.

      • secretKey (string: null) - The key within the Kubernetes secret that holds the client secret.

    • apiHost - The hostname of HCP's API. This setting is used for internal testing and validation.

      • secretName (string: null) - The name of the Kubernetes secret that holds the api hostname.

      • secretKey (string: null) - The key within the Kubernetes secret that holds the api hostname.

    • authUrl - The URL of HCP's auth API. This setting is used for internal testing and validation.

      • secretName (string: null) - The name of the Kubernetes secret that holds the authorization url.

      • secretKey (string: null) - The key within the Kubernetes secret that holds the authorization url.

    • scadaAddress - The address of HCP's scada service. This setting is used for internal testing and validation.

      • secretName (string: null) - The name of the Kubernetes secret that holds the scada address.

      • secretKey (string: null) - The key within the Kubernetes secret that holds the scada address.

  • extraLabels (map) - Extra labels to attach to all pods, deployments, daemonsets, statefulsets, and jobs. This should be a YAML map.

    Example:

    extraLabels:
      labelKey: label-value
      anotherLabelKey: another-label-value
    

  • trustedCAs (array<string>: []) - Optional PEM-encoded CA certificates that will be added to trusted system CAs.

    Example:

    trustedCAs: [
      |
      -----BEGIN CERTIFICATE-----
      MIIC7jCCApSgAwIBAgIRAIq2zQEVexqxvtxP6J0bXAwwCgYIKoZIzj0EAwIwgbkx
      ...
    ]
    

server

• server - Server, when enabled, configures a server cluster to run. This should be disabled if you plan on connecting to a Consul cluster external to the Kube cluster.

  • enabled (boolean: global.enabled) - If true, the chart will install all the resources necessary for a Consul server cluster. If you're running Consul externally and want agents within Kubernetes to join that cluster, this should probably be false.

  • logLevel (string: "") - Override global log verbosity level. One of "trace", "debug", "info", "warn", or "error".

  • image (string: null) - The name of the Docker image (including any tag) for the containers running Consul server agents.

  • replicas (integer: 1) - The number of server agents to run. This determines the fault tolerance of the cluster. Please refer to the deployment table for more information.

  • bootstrapExpect (int: null) - The number of servers that are expected to be running. It defaults to server.replicas. In most cases the default should be used, however if there are more servers in this datacenter than server.replicas it might make sense to override the default. This would be the case if two kube clusters were joined into the same datacenter and each cluster ran a certain number of servers.

  • serverCert - A secret containing a certificate & key for the server agents to use for TLS communication within the Consul cluster. Cert needs to be provided with additional DNS name SANs so that it will work within the Kubernetes cluster:

    Kubernetes Secrets backend:

    consul tls cert create -server -days=730 -domain=consul -ca=consul-agent-ca.pem \
        -key=consul-agent-ca-key.pem -dc={{datacenter}} \
        -additional-dnsname="{{fullname}}-server" \
        -additional-dnsname="*.{{fullname}}-server" \
        -additional-dnsname="*.{{fullname}}-server.{{namespace}}" \
        -additional-dnsname="*.{{fullname}}-server.{{namespace}}.svc" \
        -additional-dnsname="*.server.{{datacenter}}.{{domain}}" \
        -additional-dnsname="server.{{datacenter}}.{{domain}}"
    

    If you have generated the server-cert yourself with the consul CLI, you could use the following command to create the secret in Kubernetes:

    kubectl create secret generic consul-server-cert \
        --from-file='tls.crt=./dc1-server-consul-0.pem'
        --from-file='tls.key=./dc1-server-consul-0-key.pem'
    

    Vault Secrets backend: If you are using Vault as a secrets backend, a Vault Policy must be created which allows ["create", "update"] capabilities on the PKI issuing endpoint, which is usually of the form pki/issue/consul-server. Complete this tutorial to learn how to generate a compatible certificate. Note: when using TLS, both the server.serverCert and global.tls.caCert which points to the CA endpoint of this PKI engine must be provided.

    • secretName (string: null) - The name of the Vault secret that holds the PEM encoded server certificate.

  • exposeGossipAndRPCPorts (boolean: false) - Exposes the servers' gossip and RPC ports as hostPorts. To enable a client agent outside of the k8s cluster to join the datacenter, you would need to enable server.exposeGossipAndRPCPorts, client.exposeGossipPorts, and set server.ports.serflan.port to a port not being used on the host. Since client.exposeGossipPorts uses the hostPort 8301, server.ports.serflan.port must be set to something other than 8301.

  • ports - Configures ports for the consul servers.

    • serflan - Configures the LAN gossip port for the consul servers. If you choose to enable server.exposeGossipAndRPCPorts and client.exposeGossipPorts, that will configure the LAN gossip ports on the servers and clients to be hostPorts, so if you are running clients and servers on the same node the ports will conflict if they are both 8301. When you enable server.exposeGossipAndRPCPorts and client.exposeGossipPorts, you must change this from the default to an unused port on the host, e.g. 9301. By default the LAN gossip port is 8301 and configured as a containerPort on the consul server Pods.

      • port (integer: 8301)

  • storage (string: 10Gi) - This defines the disk size for configuring the servers' StatefulSet storage. For dynamically provisioned storage classes, this is the desired size. For manually defined persistent volumes, this should be set to the disk size of the attached volume.

  • storageClass (string: null) - The StorageClass to use for the servers' StatefulSet storage. It must be able to be dynamically provisioned if you want the storage to be automatically created. For example, to use local(https://kubernetes.io/docs/concepts/storage/storage-classes/#local) storage classes, the PersistentVolumeClaims would need to be manually created. A null value will use the Kubernetes cluster's default StorageClass. If a default StorageClass does not exist, you will need to create one. Refer to the Read/Write Tuning section of the Server Performance Requirements documentation for considerations around choosing a performant storage class.

    Note: The Reference Architecture contains best practices and recommendations for selecting suitable hardware sizes for your Consul servers.

  • persistentVolumeClaimRetentionPolicy (map) - The Persistent Volume Claim (PVC) retention policy controls if and how PVCs are deleted during the lifecycle of a StatefulSet. WhenDeleted specifies what happens to PVCs created from StatefulSet VolumeClaimTemplates when the StatefulSet is deleted, and WhenScaled specifies what happens to PVCs created from StatefulSet VolumeClaimTemplates when the StatefulSet is scaled down.

    Example:

    persistentVolumeClaimRetentionPolicy:
      whenDeleted: Retain
      whenScaled: Retain
    

  • connect (boolean: true) - This will enable/disable service mesh. Setting this to true will not automatically secure pod communication, this setting will only enable usage of the feature. Consul will automatically initialize a new CA and set of certificates. Additional service mesh settings can be configured by setting the server.extraConfig value or by applying configuration entries.

  • serviceAccount

    • annotations (string: null) - This value defines additional annotations for the server service account. This should be formatted as a multi-line string.

      annotations: |
        "sample/annotation1": "foo"
        "sample/annotation2": "bar"
      

  • resources (map) - The resource requests (CPU, memory, etc.) for each of the server agents. This should be a YAML map corresponding to a Kubernetes `ResourceRequirements`` object. NOTE: The use of a YAML string is deprecated.

    Example:

    resources:
      requests:
        memory: '200Mi'
        cpu: '100m'
      limits:
        memory: '200Mi'
        cpu: '100m'
    

  • securityContext (map) - The security context for the server pods. This should be a YAML map corresponding to a Kubernetes SecurityContext object. By default, servers will run as non-root, with user ID 100 and group ID 1000, which correspond to the consul user and group created by the Consul docker image. Note: if running on OpenShift, this setting is ignored because the user and group are set automatically by the OpenShift platform.

  • containerSecurityContext (map) - The container securityContext for each container in the server pods. In addition to the Pod's SecurityContext this can set the capabilities of processes running in the container and ensure the root file systems in the container is read-only.

    • server (map) - The consul server agent container

    • aclInit (map) - The acl-init job

    • tlsInit (map) - The tls-init job

  • updatePartition (integer: 0) - This value is used to carefully control a rolling update of Consul server agents. This value specifies the partition for performing a rolling update. Please read the linked Kubernetes and Upgrade Consul documentation for more information.

  • disruptionBudget - This configures the PodDisruptionBudget for the server cluster.

    • enabled (boolean: true) - Enables registering a PodDisruptionBudget for the server cluster. If enabled, it only registers the budget so long as the server cluster is enabled. To disable, set to false.

    • maxUnavailable (integer: null) - The maximum number of unavailable pods. By default, this will be automatically computed based on the server.replicas value to be (n/2)-1. If you need to set this to 0, you will need to add a --set 'server.disruptionBudget.maxUnavailable=0'` flag to the helm chart installation command because of a limitation in the Helm templating language.

  • extraConfig (string: {}) - A raw string of extra JSON configuration for Consul servers. This will be saved as-is into a ConfigMap that is read by the Consul server agents. This can be used to add additional configuration that isn't directly exposed by the chart.

    Example:

    extraConfig: |
      {
        "log_level": "DEBUG"
      }
    

    This can also be set using Helm's --set flag using the following syntax:

    --set 'server.extraConfig="{"log_level": "DEBUG"}"'
    

  • extraVolumes (array<map>) - A list of extra volumes to mount for server agents. This is useful for bringing in extra data that can be referenced by other configurations at a well known path, such as TLS certificates or Gossip encryption keys. The value of this should be a list of objects.

    Example:

    extraVolumes:
      - type: secret
        name: consul-certs
        load: false
    

    Each object supports the following keys:

    • type - Type of the volume, must be one of "configMap" or "secret". Case sensitive.

    • name - Name of the configMap or secret to be mounted. This also controls the path that it is mounted to. The volume will be mounted to /consul/userconfig/<name>.

    • load - If true, then the agent will be configured to automatically load HCL/JSON configuration files from this volume with -config-dir. This defaults to false.

  • extraContainers (array<map>) - A list of sidecar containers. Example:

    extraContainers:
    - name: extra-container
      image: example-image:latest
      command:
       - ...
    

  • affinity (string) - This value defines the affinity for server pods. It defaults to allowing only a single server pod on each node, which minimizes risk of the cluster becoming unusable if a node is lost. If you need to run more pods per node (for example, testing on Minikube), set this value to null.

    Example:

    affinity: |
      podAntiAffinity:
        requiredDuringSchedulingIgnoredDuringExecution:
          - labelSelector:
              matchLabels:
                app: {{ template "consul.name" . }}
                release: "{{ .Release.Name }}"
                component: server
          topologyKey: kubernetes.io/hostname
    

  • tolerations (string: "") - Toleration settings for server pods. This should be a multi-line string matching the Tolerations array in a Pod spec.

  • topologySpreadConstraints (string: "") - Pod topology spread constraints for server pods. This should be a multi-line YAML string matching the topologySpreadConstraints array in a Pod Spec.

    This requires K8S >= 1.18 (beta) or 1.19 (stable).

    Example:

    topologySpreadConstraints: |
      - maxSkew: 1
        topologyKey: topology.kubernetes.io/zone
        whenUnsatisfiable: DoNotSchedule
        labelSelector:
          matchLabels:
            app: {{ template "consul.name" . }}
            release: "{{ .Release.Name }}"
            component: server
    

  • nodeSelector (string: null) - This value defines nodeSelector labels for server pod assignment, formatted as a multi-line string.

    Example:

    nodeSelector: |
      beta.kubernetes.io/arch: amd64
    

  • priorityClassName (string: "") - This value references an existing Kubernetes priorityClassName that can be assigned to server pods.

  • extraLabels (map) - Extra labels to attach to the server pods. This should be a YAML map.

    Example:

    extraLabels:
      labelKey: label-value
      anotherLabelKey: another-label-value
    

  • annotations (string: null) - This value defines additional annotations for server pods. This should be formatted as a multi-line string.

    annotations: |
      "sample/annotation1": "foo"
      "sample/annotation2": "bar"
    

  • exposeService - Configures a service to expose ports on the Consul servers over a Kubernetes Service.

    • enabled (boolean: -) - When enabled, deploys a Kubernetes Service to reach the Consul servers.

    • type (string: LoadBalancer) - Type of service, supports LoadBalancer or NodePort.

    • nodePort - If service is of type NodePort, configures the nodePorts.

      • http (integer: null) - Configures the nodePort to expose the Consul server http port.

      • https (integer: null) - Configures the nodePort to expose the Consul server https port.

      • serf (integer: null) - Configures the nodePort to expose the Consul server serf port.

      • rpc (integer: null) - Configures the nodePort to expose the Consul server rpc port.

      • grpc (integer: null) - Configures the nodePort to expose the Consul server grpc port.

    • annotations (string: null) - This value defines additional annotations for server pods. This should be formatted as a multi-line string.

      annotations: |
        "sample/annotation1": "foo"
        "sample/annotation2": "bar"
      

  • service - Server service properties.

    • annotations (string: null) - Annotations to apply to the server service.

      annotations: |
        "annotation-key": "annotation-value"
      

  • extraEnvironmentVars (map) - A list of extra environment variables to set within the stateful set. These could be used to include proxy settings required for cloud auto-join feature, in case kubernetes cluster is behind egress http proxies. Additionally, it could be used to configure custom consul parameters.

  • snapshotAgent - EnterpriseEnterprise Values for setting up and running snapshot agents within the Consul clusters. They run as a sidecar with Consul servers.

    • enabled (boolean: false) - If true, the chart will install resources necessary to run the snapshot agent.

    • interval (string: 1h) - Interval at which to perform snapshots. Refer to interval

    • configSecret - A Kubernetes or Vault secret that should be manually created to contain the entire config to be used on the snapshot agent. This is the preferred method of configuration since there are usually storage credentials present. Please refer to the Snapshot agent config for details.

      • secretName (string: null) - The name of the Kubernetes secret or Vault secret path that holds the snapshot agent config.

      • secretKey (string: null) - The key within the Kubernetes secret or Vault secret key that holds the snapshot agent config.

    • resources (map) - The resource settings for snapshot agent pods.

    • caCert (string: null) - Optional PEM-encoded CA certificate that will be added to the trusted system CAs. Useful if using an S3-compatible storage exposing a self-signed certificate.

      Example:

      caCert: |
        -----BEGIN CERTIFICATE-----
        MIIC7jCCApSgAwIBAgIRAIq2zQEVexqxvtxP6J0bXAwwCgYIKoZIzj0EAwIwgbkx
        ...
      

  • auditLogs - EnterpriseEnterprise Added in Consul 1.8, the audit object allow users to enable auditing and configure a sink and filters for their audit logs. Please refer to audit logs documentation for further information.

    • enabled (boolean: false) - Controls whether Consul logs out each time a user performs an operation. global.acls.manageSystemACLs must be enabled to use this feature.

    • sinks (array<map>) - A single entry of the sink object provides configuration for the destination to which Consul will log auditing events.

      Example:

      sinks:
        - name: My Sink
          type: file
          format: json
          path: /tmp/audit.json
          delivery_guarantee: best-effort
          rotate_duration: 24h
          rotate_max_files: 15
          rotate_bytes: 25165824
      
      

      The sink object supports the following keys:

      • name - Name of the sink.

      • type - Type specifies what kind of sink this is. Currently only file sinks are available

      • format - Format specifies what format the events will be emitted with. Currently only json events are emitted.

      • path - The directory and filename to write audit events to.

      • delivery_guarantee - Specifies the rules governing how audit events are written. Consul only supports best-effort event delivery.

      • mode - The permissions to set on the audit log files.

      • rotate_duration - Specifies the interval by which the system rotates to a new log file. At least one of rotate_duration or rotate_bytes must be configured to enable audit logging.

      • rotate_bytes - Specifies how large an individual log file can grow before Consul rotates to a new file. At least one of rotate_bytes or rotate_duration must be configured to enable audit logging.

      • rotate_max_files - Defines the limit that Consul should follow before it deletes old log files.

externalServers

• externalServers - Configuration for Consul servers when the servers are running outside of Kubernetes. When running external servers, configuring these values is recommended if setting global.tls.enableAutoEncrypt to true or global.acls.manageSystemACLs to true.

  • enabled (boolean: false) - If true, the Helm chart will be configured to talk to the external servers. If setting this to true, you must also set server.enabled to false.

  • hosts (array<string>: []) - An array of external Consul server hosts that are used to make HTTPS connections from the components in this Helm chart. Valid values include an IP, a DNS name, or an exec= string. The port must be provided separately below. Note: This slice can only contain a single element. Note: If enabling clients, client.join must also be set to the hosts that should be used to join the cluster. In most cases, the client.join values should be the same, however, they may be different if you wish to use separate hosts for the HTTPS connections. tlsServerName is required if TLS is enabled and 'hosts' is not a DNS name.

  • httpsPort (integer: 8501) - The HTTPS port of the Consul servers.

  • grpcPort (integer: 8502) - The GRPC port of the Consul servers.

  • tlsServerName (string: null) - The server name to use as the SNI host header when connecting with HTTPS. This name also appears as the hostname in the server certificate's subject field.

  • useSystemRoots (boolean: false) - If true, consul-k8s-control-plane components will ignore the CA set in global.tls.caCert when making HTTPS calls to Consul servers and will instead use the consul-k8s-control-plane image's system CAs for TLS verification. If false, consul-k8s-control-plane components will use global.tls.caCert when making HTTPS calls to Consul servers. NOTE: This does not affect Consul's internal RPC communication which will always use global.tls.caCert.

  • k8sAuthMethodHost (string: null) - If you are setting global.acls.manageSystemACLs and connectInject.enabled to true, set k8sAuthMethodHost to the address of the Kubernetes API server. This address must be reachable from the Consul servers. Please refer to the Kubernetes Auth Method documentation.

    If global.federation.enabled is set to true, global.federation.k8sAuthMethodHost and externalServers.k8sAuthMethodHost should be set to the same value.

    You could retrieve this value from your kubeconfig by running:

    $ kubectl config view \
      -o jsonpath="{.clusters[?(@.name=='<your cluster name>')].cluster.server}"
    

  • skipServerWatch (boolean: false) - If true, setting this prevents the consul-dataplane and consul-k8s components from watching the Consul servers for changes. This is useful for situations where Consul servers are behind a load balancer.

client

• client - Values that configure running a Consul client on Kubernetes nodes.

  • enabled (boolean: false) - If true, the chart will install all the resources necessary for a Consul client on every Kubernetes node. This does not require server.enabled, since the agents can be configured to join an external cluster.

  • logLevel (string: "") - Override global log verbosity level. One of "trace", "debug", "info", "warn", or "error".

  • image (string: null) - The name of the Docker image (including any tag) for the containers running Consul client agents.

  • join (array<string>: null) - A list of valid -retry-join values. If this is null (default), then the clients will attempt to automatically join the server cluster running within Kubernetes. This means that with server.enabled set to true, clients will automatically join that cluster. If server.enabled is not true, then a value must be specified so the clients can join a valid cluster.

  • dataDirectoryHostPath (string: null) - An absolute path to a directory on the host machine to use as the Consul client data directory. If set to the empty string or null, the Consul agent will store its data in the Pod's local filesystem (which will be lost if the Pod is deleted). Security Warning: If setting this, Pod Security Policies must be enabled on your cluster and in this Helm chart (via the global.enablePodSecurityPolicies setting) to prevent other pods from mounting the same host path and gaining access to all of Consul's data. Consul's data is not encrypted at rest.

  • grpc (boolean: true) - If true, agents will enable their GRPC listener on port 8502 and expose it to the host. This will use slightly more resources, but is required for Connect.

  • nodeMeta - nodeMeta specifies an arbitrary metadata key/value pair to associate with the node (refer to -node-meta)

    • pod-name (string: ${HOSTNAME})

    • host-ip (string: ${HOST_IP})

  • exposeGossipPorts (boolean: false) - If true, the Helm chart will expose the clients' gossip ports as hostPorts. This is only necessary if pod IPs in the k8s cluster are not directly routable and the Consul servers are outside of the k8s cluster. This also changes the clients' advertised IP to the hostIP rather than podIP.

  • serviceAccount

    • annotations (string: null) - This value defines additional annotations for the client service account. This should be formatted as a multi-line string.

      annotations: |
        "sample/annotation1": "foo"
        "sample/annotation2": "bar"
      

  • resources (map) - The resource settings for Client agents. NOTE: The use of a YAML string is deprecated. Instead, set directly as a YAML map.

  • securityContext (map) - The security context for the client pods. This should be a YAML map corresponding to a Kubernetes SecurityContext object. By default, servers will run as non-root, with user ID 100 and group ID 1000, which correspond to the consul user and group created by the Consul docker image. Note: if running on OpenShift, this setting is ignored because the user and group are set automatically by the OpenShift platform.

  • containerSecurityContext (map) - The container securityContext for each container in the client pods. In addition to the Pod's SecurityContext this can set the capabilities of processes running in the container and ensure the root file systems in the container is read-only.

    • client (map) - The consul client agent container

    • aclInit (map) - The acl-init initContainer

    • tlsInit (map) - The tls-init initContainer

  • extraConfig (string: {}) - A raw string of extra JSON configuration for Consul clients. This will be saved as-is into a ConfigMap that is read by the Consul client agents. This can be used to add additional configuration that isn't directly exposed by the chart.

    Example:

    extraConfig: |
      {
        "log_level": "DEBUG"
      }
    

    This can also be set using Helm's --set flag using the following syntax:

    --set 'client.extraConfig="{"log_level": "DEBUG"}"'
    

  • extraVolumes (array<map>) - A list of extra volumes to mount for client agents. This is useful for bringing in extra data that can be referenced by other configurations at a well known path, such as TLS certificates or Gossip encryption keys. The value of this should be a list of objects.

    Example:

    extraVolumes:
      - type: secret
        name: consul-certs
        load: false
    

    Each object supports the following keys:

    • type - Type of the volume, must be one of "configMap" or "secret". Case sensitive.

    • name - Name of the configMap or secret to be mounted. This also controls the path that it is mounted to. The volume will be mounted to /consul/userconfig/<name>.

    • load - If true, then the agent will be configured to automatically load HCL/JSON configuration files from this volume with -config-dir. This defaults to false.

  • extraContainers (array<map>) - A list of sidecar containers. Example:

    extraContainers:
    - name: extra-container
      image: example-image:latest
      command:
       - ...
    

  • tolerations (string: "") - Toleration Settings for Client pods This should be a multi-line string matching the Toleration array in a PodSpec. The example below will allow Client pods to run on every node regardless of taints

    tolerations: |
      - operator: Exists
    

  • nodeSelector (string: null) - nodeSelector labels for client pod assignment, formatted as a multi-line string. ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#nodeselector

    Example:

    nodeSelector: |
      beta.kubernetes.io/arch: amd64
    

  • affinity (string: null) - Affinity Settings for Client pods, formatted as a multi-line YAML string. ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity

    Example:

    affinity: |
      nodeAffinity:
        requiredDuringSchedulingIgnoredDuringExecution:
          nodeSelectorTerms:
          - matchExpressions:
            - key: node-role.kubernetes.io/master
              operator: DoesNotExist
    

  • priorityClassName (string: "") - This value references an existing Kubernetes priorityClassName that can be assigned to client pods.

  • annotations (string: null) - This value defines additional annotations for client pods. This should be formatted as a multi-line string.

    annotations: |
      "sample/annotation1": "foo"
      "sample/annotation2": "bar"
    

  • extraLabels (map) - Extra labels to attach to the client pods. This should be a regular YAML map.

    Example:

    extraLabels:
      labelKey: label-value
      anotherLabelKey: another-label-value
    

  • extraEnvironmentVars (map) - A list of extra environment variables to set within the stateful set. These could be used to include proxy settings required for cloud auto-join feature, in case kubernetes cluster is behind egress http proxies. Additionally, it could be used to configure custom consul parameters.

  • dnsPolicy (string: null) - This value defines the Pod DNS policy for client pods to use.

  • hostNetwork (boolean: false) - hostNetwork defines whether or not we use host networking instead of hostPort in the event that a CNI plugin doesn't support hostPort. This has security implications and is not recommended as doing so gives the consul client unnecessary access to all network traffic on the host. In most cases, pod network and host network are on different networks so this should be combined with dnsPolicy: ClusterFirstWithHostNet

  • updateStrategy (string: null) - updateStrategy for the DaemonSet. Refer to the Kubernetes Daemonset upgrade strategy documentation. This should be a multi-line string mapping directly to the updateStrategy

    Example:

    updateStrategy: |
      rollingUpdate:
        maxUnavailable: 5
      type: RollingUpdate
    

dns

• dns - Configuration for DNS configuration within the Kubernetes cluster. This creates a service that routes to all agents (client or server) for serving DNS requests. This DOES NOT automatically configure kube-dns today, so you must still manually configure a stubDomain with kube-dns for this to have any effect: https://kubernetes.io/docs/tasks/administer-cluster/dns-custom-nameservers/#configure-stub-domain-and-upstream-dns-servers

  • enabled (boolean: -)

  • enableRedirection (boolean: -) - If true, services using Consul service mesh will use Consul DNS for default DNS resolution. The DNS lookups fall back to the nameserver IPs listed in /etc/resolv.conf if not found in Consul.

  • type (string: ClusterIP) - Used to control the type of service created. For example, setting this to "LoadBalancer" will create an external load balancer (for supported K8S installations)

  • clusterIP (string: null) - Set a predefined cluster IP for the DNS service. Useful if you need to reference the DNS service's IP address in CoreDNS config.

  • annotations (string: null) - Extra annotations to attach to the dns service This should be a multi-line string of annotations to apply to the dns Service

  • additionalSpec (string: null) - Additional ServiceSpec values This should be a multi-line string mapping directly to a Kubernetes ServiceSpec object.

ui

• ui - Values that configure the Consul UI.

  • enabled (boolean: global.enabled) - If true, the UI will be enabled. This will only enable the UI, it doesn't automatically register any service for external access. The UI will only be enabled on server agents. If server.enabled is false, then this setting has no effect. To expose the UI in some way, you must configure ui.service.

  • service - Configure the service for the Consul UI.

    • enabled (boolean: true) - This will enable/disable registering a Kubernetes Service for the Consul UI. This value only takes effect if ui.enabled is true and taking effect.

    • type (string: null) - The service type to register.

    • port - Set the port value of the UI service.

      • http (integer: 80) - HTTP port.

      • https (integer: 443) - HTTPS port.

    • nodePort - Optionally set the nodePort value of the ui service if using a NodePort service. If not set and using a NodePort service, Kubernetes will automatically assign a port.

      • http (integer: null) - HTTP node port

      • https (integer: null) - HTTPS node port

    • annotations (string: null) - Annotations to apply to the UI service.

      Example:

      annotations: |
        'annotation-key': annotation-value
      

    • additionalSpec (string: null) - Additional ServiceSpec values This should be a multi-line string mapping directly to a Kubernetes ServiceSpec object.

  • ingress - Configure Ingress for the Consul UI. If global.tls.enabled is set to true, the Ingress will expose the port 443 on the UI service. Please ensure the Ingress Controller supports SSL pass-through and it is enabled to ensure traffic forwarded to port 443 has not been TLS terminated.

    • enabled (boolean: false) - This will create an Ingress resource for the Consul UI.

    • ingressClassName (string: "") - Optionally set the ingressClassName.

    • pathType (string: Prefix) - pathType override - refer to: https://kubernetes.io/docs/concepts/services-networking/ingress/#path-types

    • hosts (array<map>) - hosts is a list of host name to create Ingress rules.

      hosts:
        - host: foo.bar
          paths:
            - /example
            - /test
      

    • tls (array<map>) - tls is a list of hosts and secret name in an Ingress which tells the Ingress controller to secure the channel.

      tls:
        - hosts:
          - chart-example.local
          secretName: testsecret-tls
      

    • annotations (string: null) - Annotations to apply to the UI ingress.

      Example:

      annotations: |
        'annotation-key': annotation-value
      

  • metrics - Configurations for displaying metrics in the UI.

    • enabled (boolean: global.metrics.enabled) - Enable displaying metrics in the UI. The default value of "-" will inherit from global.metrics.enabled value.

    • provider (string: prometheus) - Provider for metrics. Refer to metrics_provider This value is only used if ui.enabled is set to true.

    • baseURL (string: http://prometheus-server) - baseURL is the URL of the prometheus server, usually the service URL. This value is only used if ui.enabled is set to true.

  • dashboardURLTemplates - Corresponds to dashboard_url_templates configuration.

    • service (string: "") - Sets dashboardURLTemplates.service.

syncCatalog

• syncCatalog - Configure the catalog sync process to sync K8S with Consul services. This can run bidirectional (default) or unidirectionally (Consul to K8S or K8S to Consul only).

  This process assumes that a Consul agent is available on the host IP. This is done automatically if clients are enabled. If clients are not enabled then set the node selection so that it chooses a node with a Consul agent.

  • enabled (boolean: false) - True if you want to enable the catalog sync. Set to "-" to inherit from global.enabled.

  • image (string: null) - The name of the Docker image (including any tag) for consul-k8s-control-plane to run the sync program.

  • default (boolean: true) - If true, all valid services in K8S are synced by default. If false, the service must be annotated properly to sync. In either case an annotation can override the default.

  • priorityClassName (string: "") - Optional priorityClassName.

  • toConsul (boolean: true) - If true, will sync Kubernetes services to Consul. This can be disabled to have a one-way sync.

  • toK8S (boolean: true) - If true, will sync Consul services to Kubernetes. This can be disabled to have a one-way sync.

  • k8sPrefix (string: null) - Service prefix to prepend to services before registering with Kubernetes. For example "consul-" will register all services prepended with "consul-". (Consul -> Kubernetes sync)

  • k8sAllowNamespaces (array<string>: ["*"]) - List of k8s namespaces to sync the k8s services from. If a k8s namespace is not included in this list or is listed in k8sDenyNamespaces, services in that k8s namespace will not be synced even if they are explicitly annotated. Use ["*"] to automatically allow all k8s namespaces.

    For example, ["namespace1", "namespace2"] will only allow services in the k8s namespaces namespace1 and namespace2 to be synced and registered with Consul. All other k8s namespaces will be ignored.

    To deny all namespaces, set this to [].

    Note: k8sDenyNamespaces takes precedence over values defined here.

  • k8sDenyNamespaces (array<string>: ["kube-system", "kube-public"]) - List of k8s namespaces that should not have their services synced. This list takes precedence over k8sAllowNamespaces. * is not supported because then nothing would be allowed to sync.

    For example, if k8sAllowNamespaces is ["*"] and k8sDenyNamespaces is ["namespace1", "namespace2"], then all k8s namespaces besides namespace1 and namespace2 will be synced.

  • k8sSourceNamespace (string: null) - [DEPRECATED] Use k8sAllowNamespaces and k8sDenyNamespaces instead. For backwards compatibility, if both this and the allow/deny lists are set, the allow/deny lists will be ignored. k8sSourceNamespace is the Kubernetes namespace to watch for service changes and sync to Consul. If this is not set then it will default to all namespaces.

  • consulNamespaces - EnterpriseEnterprise These settings manage the catalog sync's interaction with Consul namespaces (requires consul-ent v1.7+). Also, global.enableConsulNamespaces must be true.

    • consulDestinationNamespace (string: default) - Name of the Consul namespace to register all k8s services into. If the Consul namespace does not already exist, it will be created. This will be ignored if mirroringK8S is true.

    • mirroringK8S (boolean: true) - If true, k8s services will be registered into a Consul namespace of the same name as their k8s namespace, optionally prefixed if mirroringK8SPrefix is set below. If the Consul namespace does not already exist, it will be created. Turning this on overrides the consulDestinationNamespace setting. addK8SNamespaceSuffix may no longer be needed if enabling this option. If mirroring is enabled, avoid creating any Consul resources in the following Kubernetes namespaces, as Consul currently reserves these namespaces for system use: "system", "universal", "operator", "root".

    • mirroringK8SPrefix (string: "") - If mirroringK8S is set to true, mirroringK8SPrefix allows each Consul namespace to be given a prefix. For example, if mirroringK8SPrefix is set to "k8s-", a service in the k8s staging namespace will be registered into the k8s-staging Consul namespace.

  • addK8SNamespaceSuffix (boolean: true) - Appends Kubernetes namespace suffix to each service name synced to Consul, separated by a dash. For example, for a service 'foo' in the default namespace, the sync process will create a Consul service named 'foo-default'. Set this flag to true to avoid registering services with the same name but in different namespaces as instances for the same Consul service. Namespace suffix is not added if 'annotationServiceName' is provided.

  • consulPrefix (string: null) - Service prefix which prepends itself to Kubernetes services registered within Consul For example, "k8s-" will register all services prepended with "k8s-". (Kubernetes -> Consul sync) consulPrefix is ignored when 'annotationServiceName' is provided. NOTE: Updating this property to a non-null value for an existing installation will result in deregistering of existing services in Consul and registering them with a new name.

  • k8sTag (string: null) - Optional tag that is applied to all of the Kubernetes services that are synced into Consul. If nothing is set, defaults to "k8s". (Kubernetes -> Consul sync)

  • consulNodeName (string: k8s-sync) - Defines the Consul synthetic node that all services will be registered to. NOTE: Changing the node name and upgrading the Helm chart will leave all of the previously sync'd services registered with Consul and register them again under the new Consul node name. The out-of-date registrations will need to be explicitly removed.

  • syncClusterIPServices (boolean: true) - Syncs services of the ClusterIP type, which may or may not be broadly accessible depending on your Kubernetes cluster. Set this to false to skip syncing ClusterIP services.

  • ingress

    • enabled (boolean: false) - Syncs the hostname from a Kubernetes Ingress resource to service registrations when a rule matched a service. Currently only supports host based routing and not path based routing. The only supported path on an ingress rule is "/". Set this to false to skip syncing Ingress services.

      Currently, port 80 is synced if there is not TLS entry for the hostname. Syncs the port 443 if there is a TLS entry that matches the hostname.

    • loadBalancerIPs (boolean: false) - Requires syncIngress to be true. syncs the LoadBalancer IP from a Kubernetes Ingress resource instead of the hostname to service registrations when a rule matched a service.

  • nodePortSyncType (string: ExternalFirst) - Configures the type of syncing that happens for NodePort services. The valid options are: ExternalOnly, InternalOnly, ExternalFirst.

    • ExternalOnly will only use a node's ExternalIP address for the sync
    • InternalOnly use's the node's InternalIP address
    • ExternalFirst will preferentially use the node's ExternalIP address, but if it doesn't exist, it will use the node's InternalIP address instead.

  • aclSyncToken - Refers to a Kubernetes secret that you have created that contains an ACL token for your Consul cluster which allows the sync process the correct permissions. This is only needed if ACLs are managed manually within the Consul cluster, i.e. global.acls.manageSystemACLs is false.

    • secretName (string: null) - The name of the Kubernetes secret that holds the acl sync token.

    • secretKey (string: null) - The key within the Kubernetes secret that holds the acl sync token.

  • nodeSelector (string: null) - This value defines nodeSelector labels for catalog sync pod assignment, formatted as a multi-line string.

    Example:

    nodeSelector: |
      beta.kubernetes.io/arch: amd64
    

  • affinity (string: null) - Affinity Settings This should be a multi-line string matching the affinity object

  • tolerations (string: null) - Toleration Settings This should be a multi-line string matching the Toleration array in a PodSpec.

  • serviceAccount

    • annotations (string: null) - This value defines additional annotations for the mesh gateways' service account. This should be formatted as a multi-line string.

      annotations: |
        "sample/annotation1": "foo"
        "sample/annotation2": "bar"
      

  • resources (map) - The resource settings for sync catalog pods.

  • logLevel (string: "") - Override global log verbosity level. One of "debug", "info", "warn", or "error".

  • consulWriteInterval (string: null) - Override the default interval to perform syncing operations creating Consul services.

  • extraLabels (map) - Extra labels to attach to the sync catalog pods. This should be a YAML map.

    Example:

    extraLabels:
      labelKey: label-value
      anotherLabelKey: another-label-value
    

  • annotations (string: null) - This value defines additional annotations for the catalog sync pods. This should be formatted as a multi-line string.

    annotations: |
      "sample/annotation1": "foo"
      "sample/annotation2": "bar"
    

connectInject

• connectInject - Configures the automatic Connect sidecar injector.

  • enabled (boolean: true) - True if you want to enable connect injection. Set to "-" to inherit from global.enabled.

  • replicas (integer: 1) - The number of deployment replicas.

  • image (string: null) - Image for consul-k8s-control-plane that contains the injector.

  • default (boolean: false) - If true, the injector will inject the Connect sidecar into all pods by default. Otherwise, pods must specify the injection annotation to opt-in to Connect injection. If this is true, pods can use the same annotation to explicitly opt-out of injection.

  • transparentProxy - Configures Transparent Proxy for Consul Service mesh services. Using this feature requires Consul 1.10.0-beta1+.

    • defaultEnabled (boolean: true) - If true, then all Consul Service mesh will run with transparent proxy enabled by default, i.e. we enforce that all traffic within the pod will go through the proxy. This value is overridable via the "consul.hashicorp.com/transparent-proxy" pod annotation.

    • defaultOverwriteProbes (boolean: true) - If true, we will overwrite Kubernetes HTTP probes of the pod to point to the Envoy proxy instead. This setting is recommended because with traffic being enforced to go through the Envoy proxy, the probes on the pod will fail because kube-proxy doesn't have the right certificates to talk to Envoy. This value is also overridable via the "consul.hashicorp.com/transparent-proxy-overwrite-probes" annotation. Note: This value has no effect if transparent proxy is disabled on the pod.

  • disruptionBudget - This configures the PodDisruptionBudget for the service mesh sidecar injector.

    • enabled (boolean: true) - This will enable/disable registering a PodDisruptionBudget for the service mesh sidecar injector. If this is enabled, it will only register the budget so long as the service mesh is enabled.

    • maxUnavailable (integer: null) - The maximum number of unavailable pods. By default, this will be automatically computed based on the connectInject.replicas value to be (n/2)-1. If you need to set this to 0, you will need to add a --set 'connectInject.disruptionBudget.maxUnavailable=0'` flag to the helm chart installation command because of a limitation in the Helm templating language.

    • minAvailable (integer: null) - The minimum number of available pods. Takes precedence over maxUnavailable if set.

  • cni - Configures consul-cni plugin for Consul Service mesh services

    • enabled (boolean: false) - If true, then all traffic redirection setup uses the consul-cni plugin. Requires connectInject.enabled to also be true.

    • logLevel (string: null) - Log level for the installer and plugin. Overrides global.logLevel

    • namespace (string: null) - Set the namespace to install the CNI plugin into. Overrides global namespace settings for CNI resources. Ex: "kube-system"

    • cniBinDir (string: /opt/cni/bin) - Location on the kubernetes node where the CNI plugin is installed. Shoud be the absolute path and start with a '/' Example on GKE:

      cniBinDir: "/home/kubernetes/bin"
      

    • cniNetDir (string: /etc/cni/net.d) - Location on the kubernetes node of all CNI configuration. Should be the absolute path and start with a '/'

    • multus (string: false) - If multus CNI plugin is enabled with consul-cni. When enabled, consul-cni will not be installed as a chained CNI plugin. Instead, a NetworkAttachementDefinition CustomResourceDefinition (CRD) will be created in the helm release namespace. Following multus plugin standards, an annotation is required in order for the consul-cni plugin to be executed and for your service to be added to the Consul Service Mesh.

      Add the annotation 'k8s.v1.cni.cncf.io/networks': '[{ "name":"consul-cni","namespace": "consul" }]' to your pod to use the default installed NetworkAttachementDefinition CRD.

      Please refer to the Multus Quickstart Guide for more information about using multus.

    • resources (map) - The resource settings for CNI installer daemonset.

    • resourceQuota - Resource quotas for running the daemonset as system critical pods

      • pods (integer: 5000)

    • securityContext (map) - The security context for the CNI installer daemonset. This should be a YAML map corresponding to a Kubernetes SecurityContext object. By default, servers will run as root, with user ID 0 and group ID 0. Note: if running on OpenShift, this setting is ignored because the user and group are set automatically by the OpenShift platform.

    • updateStrategy (string: null) - updateStrategy for the CNI installer DaemonSet. Refer to the Kubernetes Daemonset upgrade strategy documentation. This should be a multi-line string mapping directly to the updateStrategy

      Example:

      updateStrategy: |
        rollingUpdate:
          maxUnavailable: 5
        type: RollingUpdate
      

  • consulNode

    • meta (map) - meta specifies an arbitrary metadata key/value pair to associate with the node.

      Example:

      meta:
        cluster: test-cluster
        persistent: true
      

  • metrics - Configures metrics for Consul service mesh services. All values are overridable via annotations on a per-pod basis.

    • defaultEnabled (string: -) - If true, the connect-injector will automatically add prometheus annotations to connect-injected pods. It will also add a listener on the Envoy sidecar to expose metrics. The exposed metrics will depend on whether metrics merging is enabled:

      • If metrics merging is enabled: the consul-dataplane will run a merged metrics server combining Envoy sidecar and Connect service metrics, i.e. if your service exposes its own Prometheus metrics.
      • If metrics merging is disabled: the listener will just expose Envoy sidecar metrics. This will inherit from global.metrics.enabled.

    • defaultEnableMerging (boolean: false) - Configures the consul-dataplane to run a merged metrics server to combine and serve both Envoy and Connect service metrics. This feature is available only in Consul v1.10.0 or greater.

    • defaultMergedMetricsPort (integer: 20100) - Configures the port at which the consul-dataplane will listen on to return combined metrics. This port only needs to be changed if it conflicts with the application's ports.

    • defaultPrometheusScrapePort (integer: 20200) - Configures the port Prometheus will scrape metrics from, by configuring the Pod annotation prometheus.io/port and the corresponding listener in the Envoy sidecar. NOTE: This is not the port that your application exposes metrics on. That can be configured with the consul.hashicorp.com/service-metrics-port annotation.

    • defaultPrometheusScrapePath (string: /metrics) - Configures the path Prometheus will scrape metrics from, by configuring the pod annotation prometheus.io/path and the corresponding handler in the Envoy sidecar. NOTE: This is not the path that your application exposes metrics on. That can be configured with the consul.hashicorp.com/service-metrics-path annotation.

  • envoyExtraArgs (string: null) - Used to pass arguments to the injected envoy sidecar. Valid arguments to pass to envoy can be found here: https://www.envoyproxy.io/docs/envoy/latest/operations/cli e.g "--log-level debug --disable-hot-restart"

  • priorityClassName (string: "") - Optional priorityClassName.

  • extraLabels (map) - Extra labels to attach to the connect inject pods. This should be a YAML map.

    Example:

    extraLabels:
      labelKey: label-value
      anotherLabelKey: another-label-value
    

  • annotations (string: null) - This value defines additional annotations for connect inject pods. This should be formatted as a multi-line string.

    annotations: |
      "sample/annotation1": "foo"
      "sample/annotation2": "bar"
    

  • imageConsul (string: null) - The Docker image for Consul to use when performing Connect injection. Defaults to global.image.

  • logLevel (string: "") - Sets the logLevel for the consul-dataplane sidecar and the consul-connect-inject-init container. When set, this value overrides the global log verbosity level. One of "debug", "info", "warn", or "error".

  • serviceAccount

    • annotations (string: null) - This value defines additional annotations for the injector service account. This should be formatted as a multi-line string.

      annotations: |
        "sample/annotation1": "foo"
        "sample/annotation2": "bar"
      

  • resources (map) - The resource settings for connect inject pods. The defaults, are optimized for getting started worklows on developer deployments. The settings should be tweaked for production deployments.

    • requests

      • memory (string: 200Mi) - Recommended production default: 500Mi

      • cpu (string: 50m) - Recommended production default: 250m

    • limits

      • memory (string: 200Mi) - Recommended production default: 500Mi

      • cpu (string: 50m) - Recommended production default: 250m

  • failurePolicy (string: Fail) - Sets the failurePolicy for the mutating webhook. By default this will cause pods not part of the consul installation to fail scheduling while the webhook is offline. This prevents a pod from skipping mutation if the webhook were to be momentarily offline. Once the webhook is back online the pod will be scheduled. In some environments such as Kind this may have an undesirable effect as it may prevent volume provisioner pods from running which can lead to hangs. In these environments it is recommend to use "Ignore" instead. This setting can be safely disabled by setting to "Ignore".

  • namespaceSelector (string) - Selector for restricting the webhook to only specific namespaces. Use with connectInject.default: true to automatically inject all pods in namespaces that match the selector. This should be set to a multiline string. Refer to https://kubernetes.io/docs/reference/access-authn-authz/extensible-admission-controllers/#matching-requests-namespaceselector for more details.

    By default, we exclude kube-system since usually users won't want those pods injected and local-path-storage and openebs so that Kind (Kubernetes In Docker) and OpenEBS respectively can provision Pods used to create PVCs. Note that this exclusion is only supported in Kubernetes v1.21.1+.

    Example:

    namespaceSelector: |
      matchLabels:
        namespace-label: label-value
    

  • k8sAllowNamespaces (array<string>: ["*"]) - List of k8s namespaces to allow Connect sidecar injection in. If a k8s namespace is not included or is listed in k8sDenyNamespaces, pods in that k8s namespace will not be injected even if they are explicitly annotated. Use ["*"] to automatically allow all k8s namespaces.

    For example, ["namespace1", "namespace2"] will only allow pods in the k8s namespaces namespace1 and namespace2 to have Consul service mesh sidecars injected and registered with Consul. All other k8s namespaces will be ignored.

    To deny all namespaces, set this to [].

    Note: k8sDenyNamespaces takes precedence over values defined here and namespaceSelector takes precedence over both since it is applied first. kube-system and kube-public are never injected, even if included here.

  • k8sDenyNamespaces (array<string>: []) - List of k8s namespaces that should not allow Connect sidecar injection. This list takes precedence over k8sAllowNamespaces. * is not supported because then nothing would be allowed to be injected.

    For example, if k8sAllowNamespaces is ["*"] and k8sDenyNamespaces is ["namespace1", "namespace2"], then all k8s namespaces besides "namespace1" and "namespace2" will be available for injection.

    Note: namespaceSelector takes precedence over this since it is applied first. kube-system and kube-public are never injected.

  • consulNamespaces - EnterpriseEnterprise These settings manage the connect injector's interaction with Consul namespaces (requires consul-ent v1.7+). Also, global.enableConsulNamespaces must be true.

    • consulDestinationNamespace (string: default) - Name of the Consul namespace to register all k8s pods into. If the Consul namespace does not already exist, it will be created. This will be ignored if mirroringK8S is true.

    • mirroringK8S (boolean: true) - Causes k8s pods to be registered into a Consul namespace of the same name as their k8s namespace, optionally prefixed if mirroringK8SPrefix is set below. If the Consul namespace does not already exist, it will be created. Turning this on overrides the consulDestinationNamespace setting. If mirroring is enabled, avoid creating any Consul resources in the following Kubernetes namespaces, as Consul currently reserves these namespaces for system use: "system", "universal", "operator", "root".

    • mirroringK8SPrefix (string: "") - If mirroringK8S is set to true, mirroringK8SPrefix allows each Consul namespace to be given a prefix. For example, if mirroringK8SPrefix is set to "k8s-", a pod in the k8s staging namespace will be registered into the k8s-staging Consul namespace.

  • nodeSelector (string: null) - Selector labels for connectInject pod assignment, formatted as a multi-line string. ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#nodeselector

    Example:

    nodeSelector: |
      beta.kubernetes.io/arch: amd64
    

  • affinity (string: null) - Affinity Settings This should be a multi-line string matching the affinity object

  • tolerations (string: null) - Toleration Settings This should be a multi-line string matching the Toleration array in a PodSpec.

  • aclBindingRuleSelector (string: serviceaccount.name!=default) - Query that defines which Service Accounts can authenticate to Consul and receive an ACL token during Connect injection. The default setting, i.e. serviceaccount.name!=default, prevents the 'default' Service Account from logging in. If set to an empty string all service accounts can log in. This only has effect if ACLs are enabled.

    Refer to Auth methods Binding rules and Trusted identiy attributes for more details. Requires Consul >= v1.5.

  • overrideAuthMethodName (string: "") - If you are not using global.acls.manageSystemACLs and instead manually setting up an auth method for Connect inject, set this to the name of your auth method.

  • aclInjectToken - Refers to a Kubernetes secret that you have created that contains an ACL token for your Consul cluster which allows the Connect injector the correct permissions. This is only needed if Consul namespaces EnterpriseEnterprise and ACLs are enabled on the Consul cluster and you are not setting global.acls.manageSystemACLs to true. This token needs to have operator = "write" privileges to be able to create Consul namespaces.

    • secretName (string: null) - The name of the Vault secret that holds the ACL inject token.

    • secretKey (string: null) - The key within the Vault secret that holds the ACL inject token.

  • sidecarProxy

    • concurrency (string: 2) - The number of worker threads to be used by the Envoy proxy. By default the threading model of Envoy will use one thread per CPU core per envoy proxy. This leads to unnecessary thread and memory usage and leaves unnecessary idle connections open. It is advised to keep this number low for sidecars and high for edge proxies. This will control the --concurrency flag to Envoy. For additional information, refer to https://blog.envoyproxy.io/envoy-threading-model-a8d44b922310

      This setting can be overridden on a per-pod basis via this annotation:

      • consul.hashicorp.com/consul-envoy-proxy-concurrency

    • resources (map) - Set default resources for sidecar proxy. If null, that resource won't be set. These settings can be overridden on a per-pod basis via these annotations:

      • consul.hashicorp.com/sidecar-proxy-cpu-limit

      • consul.hashicorp.com/sidecar-proxy-cpu-request

      • consul.hashicorp.com/sidecar-proxy-memory-limit

      • consul.hashicorp.com/sidecar-proxy-memory-request

      • requests

        • memory (string: null) - Recommended production default: 100Mi

        • cpu (string: null) - Recommended production default: 100m

      • limits

        • memory (string: null) - Recommended production default: 100Mi

        • cpu (string: null) - Recommended production default: 100m

    • lifecycle (map) - Set default lifecycle management configuration for sidecar proxy. These settings can be overridden on a per-pod basis via these annotations:

      • consul.hashicorp.com/enable-sidecar-proxy-lifecycle

      • consul.hashicorp.com/enable-sidecar-proxy-shutdown-drain-listeners

      • consul.hashicorp.com/sidecar-proxy-lifecycle-shutdown-grace-period-seconds

      • consul.hashicorp.com/sidecar-proxy-lifecycle-graceful-port

      • consul.hashicorp.com/sidecar-proxy-lifecycle-graceful-shutdown-path

      • defaultEnabled (boolean: true)

      • defaultEnableShutdownDrainListeners (boolean: true)

      • defaultShutdownGracePeriodSeconds (integer: 30)

      • defaultGracefulPort (integer: 20600)

      • defaultGracefulShutdownPath (string: /graceful_shutdown)

    • defaultStartupFailureSeconds (integer: 0) - Configures how long the k8s startup probe will wait before the proxy is considered to be unhealthy and the container is restarted. A value of zero disables the probe.

    • defaultLivenessFailureSeconds (integer: 0) - Configures how long the k8s liveness probe will wait before the proxy is considered to be unhealthy and the container is restarted. A value of zero disables the probe.

  • initContainer (map) - The resource settings for the Connect injected init container. If null, the resources won't be set for the initContainer. The defaults are optimized for developer instances of Kubernetes, however they should be tweaked with the recommended defaults as shown below to speed up service registration times.

    • resources

      • requests

        • memory (string: 25Mi) - Recommended production default: 150Mi

        • cpu (string: 50m) - Recommended production default: 250m

      • limits

        • memory (string: 150Mi) - Recommended production default: 150Mi

        • cpu (string: null) - Recommended production default: 500m

meshGateway

• meshGateway - Mesh Gateways enable Consul Connect to work across Consul datacenters.

  • enabled (boolean: false) - If mesh gateways are enabled, a Deployment will be created that runs gateways and Consul service mesh will be configured to use gateways. This setting is required for Cluster Peering. Requirements: consul 1.6.0+ if using `global.acls.manageSystemACLs``.

  • logLevel (string: "") - Override global log verbosity level for mesh-gateway-deployment pods. One of "trace", "debug", "info", "warn", or "error".

  • replicas (integer: 1) - Number of replicas for the Deployment.

  • wanAddress - What gets registered as WAN address for the gateway.

    • source (string: Service) - source configures where to retrieve the WAN address (and possibly port) for the mesh gateway from. Can be set to either: Service, NodeIP, NodeName or Static.

      • Service - Determine the address based on the service type.

        • If service.type=LoadBalancer use the external IP or hostname of the service. Use the port set by service.port.

        • If service.type=NodePort use the Node IP. The port will be set to service.nodePort so service.nodePort cannot be null.

        • If service.type=ClusterIP use the ClusterIP. The port will be set to service.port.

        • service.type=ExternalName is not supported.

      • NodeIP - The node IP as provided by the Kubernetes downward API.

      • NodeName - The name of the node as provided by the Kubernetes downward API. This is useful if the node names are DNS entries that are routable from other datacenters.

      • Static - Use the address hardcoded in meshGateway.wanAddress.static.

    • port (integer: 443) - Port that gets registered for WAN traffic. If source is set to "Service" then this setting will have no effect. Refer to the documentation for source as to which port will be used in that case.

    • static (string: "") - If source is set to "Static" then this value will be used as the WAN address of the mesh gateways. This is useful if you've configured a DNS entry to point to your mesh gateways.

  • service - The service option configures the Service that fronts the Gateway Deployment.

    • type (string: LoadBalancer) - Type of service, ex. LoadBalancer, ClusterIP.

    • port (integer: 443) - Port that the service will be exposed on. The targetPort will be set to meshGateway.containerPort.

    • nodePort (integer: null) - Optionally set the nodePort value of the service if using a NodePort service. If not set and using a NodePort service, Kubernetes will automatically assign a port.

    • annotations (string: null) - Annotations to apply to the mesh gateway service.

      Example:

      annotations: |
        'annotation-key': annotation-value
      

    • additionalSpec (string: null) - Optional YAML string that will be appended to the Service spec.

  • hostNetwork (boolean: false) - If set to true, gateway Pods will run on the host network.

  • dnsPolicy (string: null) - dnsPolicy to use.

  • consulServiceName (string: mesh-gateway) - Consul service name for the mesh gateways. Cannot be set to anything other than "mesh-gateway" if global.acls.manageSystemACLs is true since the ACL token generated is only for the name 'mesh-gateway'.

  • containerPort (integer: 8443) - Port that the gateway will run on inside the container.

  • hostPort (integer: null) - Optional hostPort for the gateway to be exposed on. This can be used with wanAddress.port and wanAddress.useNodeIP to expose the gateways directly from the node. If hostNetwork is true, this must be null or set to the same port as containerPort. NOTE: Cannot set to 8500 or 8502 because those are reserved for the Consul agent.

  • serviceAccount

    • annotations (string: null) - This value defines additional annotations for the mesh gateways' service account. This should be formatted as a multi-line string.

      annotations: |
        "sample/annotation1": "foo"
        "sample/annotation2": "bar"
      

  • resources (map) - The resource settings for mesh gateway pods. NOTE: The use of a YAML string is deprecated. Instead, set directly as a YAML map.

  • initServiceInitContainer (map) - The resource settings for the service-init init container.

  • affinity (string: null) - This value defines the affinity for mesh gateway pods. It defaults to null thereby allowing multiple gateway pods on each node. But if one would prefer a mode which minimizes risk of the cluster becoming unusable if a node is lost, set this value to the value in the example below.

    Example:

     affinity: |
       podAntiAffinity:
         requiredDuringSchedulingIgnoredDuringExecution:
           - labelSelector:
               matchLabels:
                 app: {{ template "consul.name" . }}
                 release: "{{ .Release.Name }}"
                 component: mesh-gateway
             topologyKey: kubernetes.io/hostname
    

  • tolerations (string: null) - Optional YAML string to specify tolerations.

  • topologySpreadConstraints (string: "") - Pod topology spread constraints for mesh gateway pods. This should be a multi-line YAML string matching the topologySpreadConstraints array in a Pod Spec.

    This requires K8S >= 1.18 (beta) or 1.19 (stable).

    Example:

    topologySpreadConstraints: |
      - maxSkew: 1
        topologyKey: topology.kubernetes.io/zone
        whenUnsatisfiable: DoNotSchedule
        labelSelector:
          matchLabels:
            app: {{ template "consul.name" . }}
            release: "{{ .Release.Name }}"
            component: mesh-gateway
    

  • nodeSelector (string: null) - Optional YAML string to specify a nodeSelector config.

  • priorityClassName (string: "") - Optional priorityClassName.

  • annotations (string: null) - Annotations to apply to the mesh gateway deployment.

    Example:

    annotations: |
      'annotation-key': annotation-value
    

ingressGateways

• ingressGateways - Configuration options for ingress gateways. Default values for all ingress gateways are defined in ingressGateways.defaults. Any of these values may be overridden in ingressGateways.gateways for a specific gateway with the exception of annotations. Annotations will include both the default annotations and any additional ones defined for a specific gateway. Requirements: consul >= 1.8.0

  • enabled (boolean: false) - Enable ingress gateway deployment. Requires connectInject.enabled=true and client.enabled=true.

  • logLevel (string: "") - Override global log verbosity level for ingress-gateways-deployment pods. One of "trace", "debug", "info", "warn", or "error".

  • defaults - Defaults sets default values for all gateway fields. With the exception of annotations, defining any of these values in the gateways list will override the default values provided here. Annotations will include both the default annotations and any additional ones defined for a specific gateway.

    • replicas (integer: 1) - Number of replicas for each ingress gateway defined.

    • service - The service options configure the Service that fronts the gateway Deployment.

      • type (string: ClusterIP) - Type of service: LoadBalancer, ClusterIP or NodePort. If using NodePort service type, you must set the desired nodePorts in the ports setting below.

      • ports (array<map>: [{port: 8080, port: 8443}]) - Ports that will be exposed on the service and gateway container. Any ports defined as ingress listeners on the gateway's Consul configuration entry should be included here. The first port will be used as part of the Consul service registration for the gateway and be listed in its SRV record. If using a NodePort service type, you must specify the desired nodePort for each exposed port.

      • annotations (string: null) - Annotations to apply to the ingress gateway service. Annotations defined here will be applied to all ingress gateway services in addition to any service annotations defined for a specific gateway in ingressGateways.gateways.

        Example:

        annotations: |
          'annotation-key': annotation-value
        

      • additionalSpec (string: null) - Optional YAML string that will be appended to the Service spec.

    • serviceAccount

      • annotations (string: null) - This value defines additional annotations for the ingress gateways' service account. This should be formatted as a multi-line string.

        annotations: |
          "sample/annotation1": "foo"
          "sample/annotation2": "bar"
        

    • resources (map) - Resource limits for all ingress gateway pods

    • affinity (string: null) - This value defines the affinity for ingress gateway pods. It defaults to null thereby allowing multiple gateway pods on each node. But if one would prefer a mode which minimizes risk of the cluster becoming unusable if a node is lost, set this value to the value in the example below.

      Example:

       affinity: |
         podAntiAffinity:
           requiredDuringSchedulingIgnoredDuringExecution:
             - labelSelector:
                 matchLabels:
                   app: {{ template "consul.name" . }}
                   release: "{{ .Release.Name }}"
                   component: ingress-gateway
               topologyKey: kubernetes.io/hostname
      

    • tolerations (string: null) - Optional YAML string to specify tolerations.

    • topologySpreadConstraints (string: "") - Pod topology spread constraints for ingress gateway pods. This should be a multi-line YAML string matching the topologySpreadConstraints array in a Pod Spec.

      This requires K8S >= 1.18 (beta) or 1.19 (stable).

      Example:

      topologySpreadConstraints: |
        - maxSkew: 1
          topologyKey: topology.kubernetes.io/zone
          whenUnsatisfiable: DoNotSchedule
          labelSelector:
            matchLabels:
              app: {{ template "consul.name" . }}
              release: "{{ .Release.Name }}"
              component: ingress-gateway
      

    • nodeSelector (string: null) - Optional YAML string to specify a nodeSelector config.

    • priorityClassName (string: "") - Optional priorityClassName.

    • terminationGracePeriodSeconds (integer: 10) - Amount of seconds to wait for graceful termination before killing the pod.

    • annotations (string: null) - Annotations to apply to the ingress gateway deployment. Annotations defined here will be applied to all ingress gateway deployments in addition to any annotations defined for a specific gateway in ingressGateways.gateways.

      Example:

      annotations: |
        "annotation-key": 'annotation-value'
      

    • consulNamespace (string: default) - EnterpriseEnterprise consulNamespace defines the Consul namespace to register the gateway into. Requires global.enableConsulNamespaces to be true and Consul Enterprise v1.7+ with a valid Consul Enterprise license. Note: The Consul namespace MUST exist before the gateway is deployed.

  • gateways (array<map>) - Gateways is a list of gateway objects. The only required field for each is name, though they can also contain any of the fields in defaults. You must provide a unique name for each ingress gateway. These names must be unique across different namespaces. Values defined here override the defaults, except in the case of annotations where both will be applied.

    • name (string: ingress-gateway)

terminatingGateways

• terminatingGateways - Configuration options for terminating gateways. Default values for all terminating gateways are defined in terminatingGateways.defaults. Any of these values may be overridden in terminatingGateways.gateways for a specific gateway with the exception of annotations. Annotations will include both the default annotations and any additional ones defined for a specific gateway. Requirements: consul >= 1.8.0

  • enabled (boolean: false) - Enable terminating gateway deployment. Requires connectInject.enabled=true and client.enabled=true.

  • logLevel (string: "") - Override global log verbosity level. One of "trace", "debug", "info", "warn", or "error".

  • defaults - Defaults sets default values for all gateway fields. With the exception of annotations, defining any of these values in the gateways list will override the default values provided here. Annotations will include both the default annotations and any additional ones defined for a specific gateway.

    • replicas (integer: 1) - Number of replicas for each terminating gateway defined.

    • extraVolumes (array<map>) - A list of extra volumes to mount. These will be exposed to Consul in the path /consul/userconfig/<name>/.

      Example:

      extraVolumes:
        - type: secret
          name: my-secret
          items: # optional items array
            - key: key
              path: path # secret will now mount to /consul/userconfig/my-secret/path
      

    • resources (map) - Resource limits for all terminating gateway pods

    • affinity (string: null) - This value defines the affinity for terminating gateway pods. It defaults to null thereby allowing multiple gateway pods on each node. But if one would prefer a mode which minimizes risk of the cluster becoming unusable if a node is lost, set this value to the value in the example below.

      Example:

       affinity: |
         podAntiAffinity:
           requiredDuringSchedulingIgnoredDuringExecution:
             - labelSelector:
                 matchLabels:
                   app: {{ template "consul.name" . }}
                   release: "{{ .Release.Name }}"
                   component: terminating-gateway
               topologyKey: kubernetes.io/hostname
      

    • tolerations (string: null) - Optional YAML string to specify tolerations.

    • topologySpreadConstraints (string: "") - Pod topology spread constraints for terminating gateway pods. This should be a multi-line YAML string matching the topologySpreadConstraints array in a Pod Spec.

      This requires K8S >= 1.18 (beta) or 1.19 (stable).

      Example:

      topologySpreadConstraints: |
        - maxSkew: 1
          topologyKey: topology.kubernetes.io/zone
          whenUnsatisfiable: DoNotSchedule
          labelSelector:
            matchLabels:
              app: {{ template "consul.name" . }}
              release: "{{ .Release.Name }}"
              component: terminating-gateway
      

    • nodeSelector (string: null) - Optional YAML string to specify a nodeSelector config.

    • priorityClassName (string: "") - Optional priorityClassName.

    • annotations (string: null) - Annotations to apply to the terminating gateway deployment. Annotations defined here will be applied to all terminating gateway deployments in addition to any annotations defined for a specific gateway in terminatingGateways.gateways.

      Example:

      annotations: |
        'annotation-key': annotation-value
      

    • serviceAccount

      • annotations (string: null) - This value defines additional annotations for the terminating gateways' service account. This should be formatted as a multi-line string.

        annotations: |
          "sample/annotation1": "foo"
          "sample/annotation2": "bar"
        

    • consulNamespace (string: default) - EnterpriseEnterprise consulNamespace defines the Consul namespace to register the gateway into. Requires global.enableConsulNamespaces to be true and Consul Enterprise v1.7+ with a valid Consul Enterprise license. Note: The Consul namespace MUST exist before the gateway is deployed.

  • gateways (array<map>) - Gateways is a list of gateway objects. The only required field for each is name, though they can also contain any of the fields in defaults. Values defined here override the defaults except in the case of annotations where both will be applied.

    • name (string: terminating-gateway)

apiGateway

• apiGateway - Configuration settings for the Consul API Gateway integration

  • enabled (boolean: false) - When true the helm chart will install the Consul API Gateway controller

  • image (string: null) - Image to use for the api-gateway-controller pods and gateway instances

    Note: Using API Gateway <= 0.4 with external servers requires setting client.enabled: true.

  • imageEnvoy (string: envoyproxy/envoy:<latest supported version>) - The name (and tag) of the Envoy Docker image used for the apiGateway. For other Consul compoenents, imageEnvoy has been replaced with Consul Dataplane.

  • logLevel (string: info) - Override global log verbosity level for api-gateway-controller pods. One of "debug", "info", "warn", or "error".

  • managedGatewayClass - Configuration settings for the optional GatewayClass installed by consul-k8s (enabled by default)

    • enabled (boolean: true) - When true a GatewayClass is configured to automatically work with Consul as installed by helm.

    • nodeSelector (string: null) - This value defines nodeSelector labels for gateway pod assignment, formatted as a multi-line string.

      Example:

      nodeSelector: |
        beta.kubernetes.io/arch: amd64
      

    • tolerations (string: null) - Toleration settings for gateway pods created with the managed gateway class. This should be a multi-line string matching the Tolerations array in a Pod spec.

    • serviceType (string: LoadBalancer) - This value defines the type of service created for gateways (e.g. LoadBalancer, ClusterIP)

    • useHostPorts (boolean: false) - This value toggles if the gateway ports should be mapped to host ports

    • copyAnnotations - Configuration settings for annotations to be copied from the Gateway to other child resources.

      • service (string: null) - This value defines a list of annotations to be copied from the Gateway to the Service created, formatted as a multi-line string.

        Example:

        service:
          annotations: |
            - external-dns.alpha.kubernetes.io/hostname
        

    • deployment (map) - This value defines the number of pods to deploy for each Gateway as well as a min and max number of pods for all Gateways

      Example:

      deployment:
        defaultInstances: 3
        maxInstances: 8
        minInstances: 1
      

  • serviceAccount - Configuration for the ServiceAccount created for the api-gateway component

    • annotations (string: null) - This value defines additional annotations for the client service account. This should be formatted as a multi-line string.

      annotations: |
        "sample/annotation1": "foo"
        "sample/annotation2": "bar"
      

  • controller - Configuration for the api-gateway controller component

    • replicas (integer: 1) - This value sets the number of controller replicas to deploy.

    • annotations (string: null) - Annotations to apply to the api-gateway-controller pods.

      annotations: |
        "annotation-key": "annotation-value"
      

    • priorityClassName (string: "") - This value references an existing Kubernetes priorityClassName that can be assigned to api-gateway-controller pods.

    • nodeSelector (string: null) - This value defines nodeSelector labels for api-gateway-controller pod assignment, formatted as a multi-line string.

      Example:

      nodeSelector: |
        beta.kubernetes.io/arch: amd64
      

    • tolerations (string: null) - This value defines the tolerations for api-gateway-controller pod, this should be a multi-line string matching the Tolerations array in a Pod spec.

    • service - Configuration for the Service created for the api-gateway-controller

      • annotations (string: null) - Annotations to apply to the api-gateway-controller service.

        annotations: |
          "annotation-key": "annotation-value"
        

  • resources (map) - The resource settings for api gateway pods.

  • initCopyConsulContainer (map) - The resource settings for the copy-consul-bin init container.

webhookCertManager

• webhookCertManager - Configuration settings for the webhook-cert-manager webhook-cert-manager ensures that cert bundles are up to date for the mutating webhook.

  • tolerations (string: null) - Toleration Settings This should be a multi-line string matching the Toleration array in a PodSpec.

  • nodeSelector (string: null) - This value defines nodeSelector labels for the webhook-cert-manager pod assignment, formatted as a multi-line string.

    Example:

    nodeSelector: |
      beta.kubernetes.io/arch: amd64
    

  • resources (map) - The resource requests (CPU, memory, etc.) for the server-acl-init and server-acl-init-cleanup pods. This should be a YAML map corresponding to a Kubernetes `ResourceRequirements`` object.

    Example:

    resources:
      requests:
        memory: '200Mi'
        cpu: '100m'
      limits:
        memory: '200Mi'
        cpu: '100m'
    

prometheus

• prometheus - Configures a demo Prometheus installation.

  • enabled (boolean: false) - When true, the Helm chart will install a demo Prometheus server instance alongside Consul.

tests

• tests - Control whether a test Pod manifest is generated when running helm template. When using helm install, the test Pod is not submitted to the cluster so this is only useful when running helm template.

  • enabled (boolean: true)

telemetryCollector

• telemetryCollector

  • enabled (boolean: false) - Enables the consul-telemetry-collector deployment

  • logLevel (string: "") - Override global log verbosity level. One of "trace", "debug", "info", "warn", or "error".

  • image (string: hashicorp/consul-telemetry-collector:0.0.2) - The name of the Docker image (including any tag) for the containers running the consul-telemetry-collector

  • resources (map) - The resource settings for consul-telemetry-collector pods.

  • replicas (integer: 1) - This value sets the number of consul-telemetry-collector replicas to deploy.

  • customExporterConfig (string: null) - This value defines additional configuration for the telemetry collector. It should be formatted as a multi-line json blob string

    customExporterConfig: |
      {"http_collector_endpoint": "other-otel-collector"}
    

  • service

    • annotations (string: null) - This value defines additional annotations for the telemetry-collector's service account. This should be formatted as a multi-line string.

      annotations: |
        "sample/annotation1": "foo"
        "sample/annotation2": "bar"
      

  • serviceAccount

    • annotations (string: null) - This value defines additional annotations for the telemetry-collector's service account. This should be formatted as a multi-line string.

      annotations: |
        "sample/annotation1": "foo"
        "sample/annotation2": "bar"
      

  • cloud

    • resourceId - The resource id of the HCP Consul Central cluster to push metrics for. Eg: organization/27109cd4-a309-4bf3-9986-e1d071914b18/project/fcef6c24-259d-4510-bb8d-1d812e120e34/hashicorp.consul.global-network-manager.cluster/consul-cluster

      This is used for HCP Consul Central-linked or managed clusters where global.cloud.resourceId is unset. For example, when using externalServers with HCP Consul-managed clusters or HCP Consul Central-linked clusters in a different admin partition.

      If global.cloud.resourceId is set, this should either be unset (defaulting to global.cloud.resourceId) or be the same as global.cloud.resourceId.

      • secretName (string: null) - The name of the Kubernetes secret that holds the resource id.

      • secretKey (string: null) - The key within the Kubernetes secret that holds the resource id.

    • clientId - The client id portion of a service principal with authorization to push metrics to HCP

      This is set in two scenarios:

      • the service principal in global.cloud is unset

      • the HCP UI provides a service principal with more narrowly scoped permissions that the service principal used in global.cloud

      • secretName (string: null) - The name of the Kubernetes secret that holds the client id.

      • secretKey (string: null) - The key within the Kubernetes secret that holds the client id.

    • clientSecret - The client secret portion of a service principal with authorization to push metrics to HCP.

      This is set in two scenarios:

      • the service principal in global.cloud is unset

      • the HCP UI provides a service principal with more narrowly scoped permissions that the service principal used in global.cloud

      • secretName (string: null) - The name of the Kubernetes secret that holds the client secret.

      • secretKey (string: null) - The key within the Kubernetes secret that holds the client secret.

  • initContainer

    • resources (map) - The resource settings for consul-telemetry-collector initContainer.

  • nodeSelector (string: null) - Optional YAML string to specify a nodeSelector config.

  • priorityClassName (string: "") - Optional priorityClassName.

  • extraEnvironmentVars (map) - A list of extra environment variables to set within the deployment. These could be used to include proxy settings required for cloud auto-join feature, in case kubernetes cluster is behind egress http proxies. Additionally, it could be used to configure custom consul parameters.

Helm Chart Examples

The below values.yaml results in a single server Consul cluster with a LoadBalancer to allow external access to the UI and API.

# values.yaml
server:
  replicas: 1
  bootstrapExpect: 1

ui:
  service:
    type: LoadBalancer

The below values.yaml results in a three server Consul Enterprise cluster with 100GB of storage and automatic connect injection.

Note, this would require a secret that contains the enterprise license key.

# values.yaml
global:
  image: 'hashicorp/consul-enterprise:1.4.2-ent'

server:
  replicas: 3
  bootstrapExpect: 3
  enterpriseLicense:
    secretName: 'consul-license'
    secretKey: 'key'
  storage: 100Gi
  connect: true

client:
  grpc: true

connectInject:
  enabled: true
  default: false

Customizing the Helm Chart

Consul within Kubernetes is highly configurable and the Helm chart contains dozens of the most commonly used configuration options. If you need to extend the Helm chart with additional options, we recommend using a third-party tool, such as kustomize or ship. Note that the Helm chart heavily relies on Helm lifecycle hooks, and so features like bootstrapping ACLs or TLS will not work as expected. Additionally, we can make changes to the internal implementation (e.g., renaming template files) that may be backward incompatible with such customizations.