Upgrading Consul on Kubernetes Components

Upgrade Types

Consul on Kubernetes will need to be upgraded/updated if you change your Helm configuration, if a new Helm chart is released, or if you wish to upgrade your Consul version.

Helm Configuration Changes

If you make a change to your Helm values file, you will need to perform a helm upgrade for those changes to take effect.

For example, if you've installed Consul with the following:

global:
  name: consul
connectInject:
  enabled: false

And you wish to set connectInject.enabled to true:

global:
  name: consul
connectInject:
-  enabled: false
+  enabled: true

To update your deployment configuration using Helm, perform the following steps.

1. Determine your current installed chart version.

   $ helm list --filter consul --namespace consul 
   NAME    NAMESPACE   REVISION    UPDATED                                 STATUS      CHART           APP VERSION
   consul  consul      2           2022-02-02 21:49:45.647678 -0800 PST    deployed    consul-0.40.0   1.11.2
   

   In this example, version 0.40.0 (from consul-k8s:0.40.0) is being used, and Consul on Kubernetes is installed in the consul namespace.

2. Perform a helm upgrade:

   $ helm upgrade consul hashicorp/consul --namespace consul --version 0.40.0 --values /path/to/my/values.yaml
   

   Before performing the upgrade, be sure you've read the other sections on this page, continuing at Determining What Will Change.

Helm Chart Version Upgrade

You may wish to upgrade your Helm chart version to take advantage of new features, bugfixes, or because you want to upgrade your Consul version, and it requires a certain Helm chart version.

1. Update your local Helm repository cache:

   $ helm repo update
   

2. List all available versions. Here you can observe that the latest version of 0.40.0.

   $ helm search repo hashicorp/consul --versions
   NAME                CHART VERSION   APP VERSION DESCRIPTION
   hashicorp/consul    0.40.0          1.11.2      Official HashiCorp Consul Chart
   hashicorp/consul    0.39.0          1.11.1      Official HashiCorp Consul Chart
   hashicorp/consul    0.38.0          1.10.4      Official HashiCorp Consul Chart
   hashicorp/consul    0.37.0          1.10.4      Official HashiCorp Consul Chart
   ...
   

3. To determine which version you have installed, issue the following command:

   $ helm list --filter consul --namespace consul
   NAME    NAMESPACE   REVISION    UPDATED                                 STATUS      CHART           APP VERSION
   consul  consul      2           2022-02-02 21:49:45.647678 -0800 PST    deployed    consul-0.39.0   1.11.1
   

   In this example, version 0.39.0 (from consul-k8s:0.39.0) is being used. If you want to upgrade to the latest 0.40.0 version, use the following procedure:

4. Check the changelog for any breaking changes from that version and any versions in between: CHANGELOG.md.

5. Upgrade by performing a helm upgrade with the --version flag:

   $ helm upgrade consul hashicorp/consul --namespace consul --version 0.40.0 --values /path/to/my/values.yaml
   

   Before performing the upgrade, be sure you've read the other sections on this page, continuing at Determining What Will Change.

Consul Version Upgrade

If a new version of Consul is released, you will need to perform a Helm upgrade to update to the new version.

1. Ensure you've read the Upgrading Consul documentation.

2. Ensure you've read any specific instructions for the version you're upgrading to and the Consul changelog for that version.

3. Read our Compatibility Matrix to ensure your current Helm chart version supports this Consul version. If it does not, you may need to also upgrade your Helm chart version at the same time.

4. Set global.image in your values.yaml to the desired version:

   values.yaml

   global:
     image: consul:1.11.2
   

5. Determine your current installed chart version. In this example, version 0.39.0 (from consul-k8s:0.39.0) is being used.

   $ helm list --filter consul --namespace consul
   NAME    NAMESPACE   REVISION    UPDATED                                 STATUS      CHART           APP VERSION
   consul  consul      2           2022-02-02 21:49:45.647678 -0800 PST    deployed    consul-0.39.0   1.11.1
   

6. Perform a helm upgrade:

   $ helm upgrade consul hashicorp/consul --namespace consul --version 0.39.0 --values /path/to/my/values.yaml
   

   Before performing the upgrade, be sure you have read the other sections on this page, continuing at Determining What Will Change.

Determining What Will Change

Before upgrading, it's important to understand what changes will be made to your cluster. For example, you will need to take more care if your upgrade will result in the Consul server StatefulSet being redeployed.

There is no built-in functionality in Helm that shows what a helm upgrade will change. There is, however, a Helm plugin helm-diff that can be used.

1. Install helm-diff with:

   $ helm plugin install https://github.com/databus23/helm-diff
   

2. If you are updating your values.yaml file, do so now.

3. Take the same helm upgrade command you were planning to issue but perform helm diff upgrade instead of helm upgrade:

   $ helm diff upgrade consul hashicorp/consul --namespace consul --version 0.40.0 --values /path/to/your/values.yaml
   

   This will print out the manifests that will be updated and their diffs.

4. To see only the objects that will be updated, add | grep "has changed":

   $ helm diff upgrade consul hashicorp/consul --namespace consul --version 0.40.0 --values /path/to/your/values.yaml |
     grep "has changed"
   

5. Take specific note if consul-client, DaemonSet or consul-server, StatefulSet are listed. This means that your Consul client daemonset or Consul server statefulset (or both) will be redeployed.

   If either is being redeployed, we will follow the same pattern for upgrades as on other platforms: the servers will be redeployed one-by-one, and then the clients will be redeployed in batches. Read Upgrading Consul and then continue reading below.

   If neither the client daemonset nor the server statefulset is being redeployed, then you can continue with the helm upgrade without any specific sequence to follow.

Service Mesh

If you are using Consul's service mesh features, as opposed to the service sync functionality, you must be aware of the behavior of the service mesh during upgrades.

Consul clients operate as a daemonset across all Kubernetes nodes. During an upgrade, if the Consul client daemonset has changed, the client pods will need to be restarted because their spec has changed.

When a Consul client pod is restarted, it will deregister itself from Consul when it stops. When the pod restarts, it will re-register itself with Consul. Thus, during the period between the Consul client on a node stopping and restarting, the following will occur:

1. The node will be deregistered from Consul. It will not show up in the Consul UI nor in API requests.
2. Because the node is deregistered, all service pods that were on that node will also be deregistered. This means they will not receive service mesh traffic until the Consul client pod restarts.
3. Service pods on that node can continue to make requests through the service mesh because each Envoy proxy maintains a cache of the locations of upstream services. However, if the upstream services change IPs, Envoy will not be able to refresh its cluster information until its local Consul client is restarted. So services can continue to make requests without downtime for a short period of time, however, it's important for the local Consul client to be restarted as quickly as possible.

Once the local Consul client pod restarts, each service pod needs to be re-registered with its local Consul client. This is done automatically by the connect inject controller.

Because service mesh pods are briefly deregistered during a Consul client restart, it's important that you do not restart all Consul clients at once. Otherwise you may experience downtime because no replicas of a specific service will be in the mesh.

In addition, it's important that you have multiple replicas for each service. If you only have one replica, then during restart of the Consul client on the node hosting that replica, it will be briefly deregistered from the mesh. Since it's the only replica, other services will not be able to make calls to that service. (NOTE: This can also be avoided by stopping that replica so it is rescheduled to a node whose Consul client has already been updated.)

Given the above, we recommend that after Consul servers are upgraded, the Consul client daemonset is set to use the OnDelete update strategy and Consul clients are deleted one by one or in batches. See Upgrading Consul Servers and Upgrading Consul Clients for more details.

Upgrading Consul Servers

To initiate the upgrade:

1. Change the global.image value to the desired Consul version

2. Set the server.updatePartition value equal to the number of server replicas. By default there are 3 servers, so you would set this value to 3

3. Set the updateStrategy for clients to OnDelete

   config.yaml

   global:
     image: 'consul:123.456'
   server:
     updatePartition: 3
   client:
     updateStrategy: |
       type: OnDelete
   

   The updatePartition value controls how many instances of the server cluster are updated. Only instances with an index greater than the updatePartition value are updated (zero-indexed). Therefore, by setting it equal to replicas, none should update yet.

   The updateStrategy controls how Kubernetes rolls out changes to the client daemonset. By setting it to OnDelete, no clients will be restarted until their pods are deleted. Without this, they would be redeployed alongside the servers because their Docker image versions have changed. This is not desirable because we want the Consul servers to be upgraded before the clients.

4. Next, perform the upgrade:

   $ helm upgrade consul hashicorp/consul --namespace consul --version <your-version> --values /path/to/your/values.yaml
   

   This will not cause the servers to redeploy (although the resource will be updated). If everything is stable, begin by decreasing the updatePartition value by one, and performing helm upgrade again. This will cause the first Consul server to be stopped and restarted with the new image.

5. Wait until the Consul server cluster is healthy again (30s to a few minutes). This can be confirmed by issuing consul members on one of the previous servers, and ensuring that all servers are listed and are alive.

6. Decrease updatePartition by one and upgrade again. Continue until updatePartition is 0. At this point, you may remove the updatePartition configuration. Your server upgrade is complete.

Upgrading Consul Clients

With the servers upgraded, it is time to upgrade the clients. If you are using Consul's service mesh features, you will want to be careful restarting the clients as outlined in Service Mesh.

You can either:

1. Manually issue kubectl delete pod <id> for each consul daemonset pod

2. Set the updateStrategy to rolling update with a small number:

   client:
     updateStrategy: |
       rollingUpdate:
         maxUnavailable: 2
       type: RollingUpdate
   

   Then, run helm upgrade. This will upgrade the clients in batches, waiting until the clients come up healthy before continuing.

3. Cordon and drain each node to ensure there are no connect pods active on it, and then delete the consul client pod on that node.

Configuring TLS on an Existing Cluster

If you already have a Consul cluster deployed on Kubernetes and would like to turn on TLS for internal Consul communication, please see Configuring TLS on an Existing Cluster.