Complete Configuration Example

KMS Worker Configuration

KMS Workers require a name field. This specifies a unique name of this worker within the Boundary cluster. The name value can be:

• a direct name string (must be all lowercase)
• a reference to a file on disk (file://) from which the name is read
• an env var (env://) from which the name is read.

KMS Workers accept an optional description field. The description value can be:

• a direct description string
• a reference to a file on disk (file://) from which the name is read
• an env var (env://) from which the name is read.

worker {
  name = "example-worker"
  description = "An example worker"
  public_addr = "5.1.23.198"
}

KMS Workers also require a KMS block designated for worker-auth. This is the KMS configuration for authentication between the workers and controllers and must be present. Example (not safe for production!):

  kms "aead" {
    purpose = "worker-auth"
    aead_type = "aes-gcm"
    key = "8fZBjCUfN0TzjEGLQldGY4+iE9AkOvCfjh7+p0GtRBQ="
    key_id = "global_worker-auth"
}

This configuration must be the same for the worker-auth configuration for the controller if you're running the controller and worker as separate servers.

Optionally, a KMS stanza for configuration encryption purpose can also be specified:

# Configuration encryption block: decrypts sensitive values in the
# configuration file. See `boundary config [encrypt|decrypt] -h`.
kms "aead" {
  purpose   = "config"`
  aead_type = "aes-gcm"
  key       = "7xtkEoS5EXPbgynwd+dDLHopaCqK8cq0Rpep4eooaTs="
}

Boundary supports many kinds of KMS integrations. For a complete guide to all available KMS types, see our KMS documentation.

listener "tcp" {
    purpose = "proxy"
    tls_disable = true
    address = "127.0.0.1"
}

worker {
  # Name attr must be unique across workers
  name = "demo-worker-1"
  description = "A default worker created for demonstration"

  # Workers must be able to reach upstreams on :9201
  initial_upstreams = [
    "10.0.0.1",
    "10.0.0.2",
    "10.0.0.3",
  ]

  public_addr = "myhost.mycompany.com"

  tags {
    type   = ["prod", "webservers"]
    region = ["us-east-1"]
  }
}

# must be same key as used on controller config
kms "aead" {
    purpose = "worker-auth"
    aead_type = "aes-gcm"
    key = "8fZBjCUfN0TzjEGLQldGY4+iE9AkOvCfjh7+p0GtRBQ="
    key_id = "global_worker-auth"
}

initial_upstreams are used to connect to upstream Boundary clusters.

Resources

For more on how tags{} in the above configuration are used to facilitate routing to the correct target, refer to the Worker Tags page.